Allround e-chain®
The E4.1 system was consistently developed further, thereby adopting the proven E2/000 series and combining it with the benefits of the E4 series.
News and Line Extensions 2011
e-chain®, chainflex® and readychain®
Allround e-tubes
The closed design of the E4.1 light series has been specially developed for use in machine tools.
E4.1 tube with aluminium cover
By request: a new look introduced during the EMO – E4.1 tube with aluminium cover
Enclosed KMA bracket elements
With this innovation the last “gap“ has been closed for applications in the work area of machine tools.
Roll clip for hoses
A new roll clip has been developed to reduce abrasion on stiff or high pressure hoses.
Allround mounting bracket
A further development for the highly dynamic energy chain of the E3 series.
C-Chain
New perspectives and opportuinities for conveyors and handling equipment. Energy, data, pneumatics and fluids in one module kit for e-chainsystems®
2nd generation E6
After 10 successful years as a cleanroom and “whisper“ chain, the new generation is in the starting blocks.
Triflex® RSD and Triflex® RSP
Intelligent retraction system for multi axis robot applications apply
E4.112: growth in size
The range of the igus® E4.1 program is further expanded.
For large hoses - more variability
For the e.chain® standard – the igus® E2/000 system is now available as a product range with snap-open clamps for the series 2400, 2600 and 3400.
TwisterBand: 7000° Rotary
Now turn on its own axis with 2 new sizes and a new interior height of 10mm.
Rolling instead of gliding
For more than 10 years demanding applications have been successfully equipped by the rol e.chain® program.
Guidelok E2/000
By the use of smaller e.chains®, applications with signific reduced installation space can be achieved.
Electronic monitoring module
The “PPDS“ (push pull force detection) systemfrom igus® monitors the push-pull forces of the e.chains® online.
RX-tube new inner hight
Problem solver for energy supply systems in the areas with chips – new size RX32 available
guidelok slimline „F“
Safe vertical guidance for e.chains® in high-speed rack feeders.
micro FLIZZ®
Small e.chain® in profile: Master long travels with the smallest of e.chains® – without any interruptions.
E4/light - new inner height
Proven E4/light system with new interior heights.
E4-tubes with new widths
Series R4.80 and R608 with new width available as of now.
Chainfix strain relief
igus® strain relief separators with integrated strain relief teeth.
Triflex® R: B version
New: Now 3 further sizes with the advanced ball and socket connection now uses an additional lock for even higher stability.
Heat protective hose and Resistant shield
Heat protective and Wear-resistant shield for retrofit.
World Premiere: air. chain - the “self-running e.chain®“
Available for courageous and experimental customers, possibly also for „beta testers“.
Assembly tool
For almost every E2/000-e.chain® available. Quick opening with assembly tools.
guidefast: Complete tool box package for indoor cranes:
Trough for fast and easyassembly to the side of standard indoor crane girders
ATEX and ESD information
igus® material for applications involving ESD (electrostatic discharge) and ATEX.
Installation service
Ensure a faultless installation, avoid downtimes and additional costs ...
Expert system for long travels
Energy supply for long travels from 10 to 60 m.
e-chain® express selection
Product finder and configurator for Energy Chains® up to 13 m travel.
QuickRobot - Robot equipment aid
Find complete equipment with cable guidance systems for various robot models.
CF240.PUR data cables
The cost-efficient PUR data cable for the e.chain® in machine tool making with optimized media resistance and UL-CSA approval.
igus® Connectors - Yamaichi Y-CONKIT
Extension of our successful igus® connector program with the Yamaichi conncector kits.
CF211 PVC data cable
After an extensive series of tests and optimizations the bending radius could be reduced from the previous 10 x d to 7.5 x d.
CF11 TPE data cable
After an extensive series of tests and optimizations the bending radius could be reduced from the previous 10 x d to 6,8 x d.
Chainflex® USB 3.0 cable
A new USB 3.0 cable for the new USB standard developed.
CF77.UL.D control cables
The cable series presented in 2008 is qualified for the robot sector after extensive testing.
Sensor/actuator distributors
To connect sensor/actuator distributors (5 x d) connector cable M23.
New assembled cables
igus® again expanded the readycable® program and now offers 1600 harnessed drive cables.
QuickPin 2.0 connector-cable configurator
In only 3 minutes select from over 950 Chainflex® cables and 3000 connector components, configure cable online, order directly.
Polymer bearings - iglidur®, igubal®, DryLin® and xiros®
iglidur® goes green
Based on 54 % renewable resources, technologically this new material also meets high requirements.
Extreme loads bearing
Where previous iglidur® bearing solutions in the extreme load range end, the iglidur® Q2 goes one better.
high chemical resistance
Usable up to +250 °C, extreme media-resistant even in cleaning processes with hydrogen peroxide.
detectable bearings
In the rarest of cases broken pieces of the bearings can be detected in the production line.
Polysorb disc spring
The new polysorb option, when high spring forces and extreme media resistance are required.
Stock bars made from iglidur® J350
An outstanding material for rotating applications and for high temperatures.
FDA-conform stock bars
A very universal material for use in the area of food and pharmaceutical industries.
iglidur® A180 - Stock bars
iglidur® materials as round material or as mechanically ready-machined special components in 3 to 5 days.
Pillow block bearing with large diameter
With the well-known features like self-aligning and maintenance-free, a large pillow block bearing is now available to users.
pressfit spherical bearing “low cost“
With this version of pressfit spherical bearings of the dimension series E we offer an alternative to our standard with the same technically characteristics.
Metal detectable igubal® components
igubal® spherical bearings can be found quickly in case of misuse or crash of the system through metal detectable material.
drylin® RJUMP Splitted housing
Full-plastic pedestal bearings from high-performance plastics combined with the proven iglidur® J sliding films.
Splitted leadscrew nut
The drylin® TR leadscrew nuts are lubrication-free and manufactured from iglidur® J.
drylin® with ball bearings
DryLin® linear table with ball bearing spindle
Heavy duty - V-drive WT-4
DryLin® SHT-WT V-drives offer highest flexibility for positioning
drylin® E Motors
The consistant development of the toolbox and system concept of the lubrication-free drylin® drive technology.
Connector cables for motors
The ideal complementation to the drylin® E-program offers the Chainflex® connection cables.
Position switch
Through the compact and easy assembley of the initiators the idea of the modular system the drylin® E-series will be proceeded.
Zero backlash screw drives
Screw drives with steep thread for quick adjustments of small loads.
drylin® TR anti-backlash nuts
drylin® TR anti-backlash nuts: additional sizes
Belt drive axis ZLW-1660 new size
New size for belt drive axis: ZLW-1660
SLW - stop `n` go
This additional function for linear carriages enables the use of an unlimited number of carriages on one guide.
EasyTube inserted on one side
The new carrier flange enables the horizontal and vertical installation of the EasyTube on one side.
EasyTube – now even lighter
The weight-optimized carriage option of the SET-25 for all cost-sensitive adjustment movements.
Linear slide table with ball bearing leadscrew support
Linear guide and spindle absolutely lubrication-free.
Mono-Slide guide
The compact, flat carriages are machined from aluminum profiles and subsequently anodized.
DryLin® N 130°
This only 27mm wide flat guide is lubrication-free and can be used up to 130°C.
DryLin® N end caps
The new plastic end caps, suitable for DryLin® N rails, offer “protection against loss“ for the carriages.
DryLin® W Hybrid carriage
Now roll and glide as a complete system on DryLin® W double rails.
SAW-actuatures specially for E-Drives
Ready-to-install linear axes with stepper motor type NEMA17 und 23.
drylin® E accessories
Spacer, motor flange and coupling due to the right linear tabel and motor combinations.
drylin® RSDJ - Slide disk
drylin® glide pads made of high-performance plastic iglidur® J available off stock.
DryLin® W configurator for double rails
Simple and quick selection of a double rail with matching carriage.
DryLin® W configurator with special parts
Simple and quick selection of a double rail with matching carriage.
drylin® drive system configurator
Just enter useful application-data and compare adequate Linear Slide Tables online quickly and easily. Now including motors
Radial deep-groove ball bearings in new sizes
The cost effective xiros® B180 standard product range for temperatures up to 80°C expands by the sizes 625 and 6002.
Polymer ball transfer unit new dimensions
The xiros® ball transfer unit made of xirodur® B180 for the lubricant-free transport of sensitive products is now available in size 522.
Slewing ring new Dimension
From now on the xiros® slewing ring bearing is also available in the installation size 100.
xiros® electrically conductive
xiros® F180 polymer ball bearings offer protection against electrostatic discharge.
xiros® clamping rings
xiros® clamp rings offer the possibility to install the xiros® ball casters in another orientation from the standard horizontal position.
PRT accessories
PRT spacing rings for slewing ring bearings in low-priced plastic version.
PRT-01 with square flange
The smallest slewing ring bearing in size 20 is now available with square flange.
PRT-01 with clamp function
The slewing ring PRT-01-30 with head ring including clamp function for 30h7 tolerated shafts.
PRT-HK-30 hand clamp
The PRT clamp for quick and easy fixation with friction hold is now available as well for size 30.
Slewing ring PRT-01-20
iglidur® PRT-01-20 - The Newest and smallest Member of type series 01.
High temperature slewing ring bearing
The high temperature option of type series 01 is now also available in the largest size!
PRT-01 with seal
The insensitivity to dirt and ruggedness of the iglidur® PRT slewing ring bearings can be increased by the use of a seal.
PRT with steel spur gearing
If pairing with a plastic gear wheel or a plastic steering rack is not possible.
robolink
Drive unit with 5 DOF articulated arm
robolink drive unit for a 5 DOF articulated arm
Joint with 180° oscillating angle
New version of the RL-50 , joint with changed operating area of the oscillating movement.
Award-winning igus® designs
"Design Oscars" for igus® products in the category "Industry Design"
News and program line extensions archive
2010
2009
2008
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!