The igus® e-chain® for fast-moving gantry cranes – quiet, fast and low-abrasion
Easy quick release harnessed e-chains® in seconds, no tools required
Maximum wear-resistance with the new iglidur® tribo filament for 3D printers as piece goods.
Automatically couple RTGs with electricity and data: the e-rover from igus®
dryspin® technology for high helix threads
Highly wear-resistant tribo-tape made of iglidur® V400
Lightweight, highly dynamic and costeffective additional widths and radii
chainflex® M – the low-cost, tested cable range. Now with UL approval.
Wherever samples are analysed and evaluated, the new drylin® lifting/swiveling unit offers a lubricant-free and cost-effective alternative to conventional systems with recirculating ball bearings.
drylin® gantries - Flat, line, room
Rapid manual adjustment for linear module SHT-08-FF
e-cord micro — for capillary tubes
Trapezoidal lead screw nut made of iglidur® R
R2.75 – e-tube openable from both sides with 75 mm inner height.
New option: Standard drive versions now available in stainless steel
Cat 7 standard chainflex® cable.
Smallest installation size now also available as a XY table
Cat 7 standard chainflex® cable.
CF888.021 | CF888.060 PVC bus cable for CAN-Bus & Profinet.
Fibre optic cable with Offshore approval.
More quality in robot cables.
Expanded cross section product range of shielded hybrid servo cables
CFRIP® makes it up to 50% quicker to strip jackets – now available on 215 more chainflex® cables
Protect and securely connect sensitive connectors.
Easy quick release harnessed e-chains® in seconds, no tools required
Automatically couple RTGs with electricity and data: the e-rover from igus®
Available in 24 hours: drylin® linear axes with motor
drylin® gantries - Flat, line, room
drylin® DC gear motor with new level of performance
Highly wear-resistant tribo-tape made of iglidur® V400
Maximum wear-resistance with the iglidur® tribo filament for 3D printers as piece goods.
iglidur® X up to diameter 120 mm.
Completion of the product range by two additional dimensions
Three new dimensions for ar stocks made of iglidur® J3.
xiros® flange ball bearings with stainless steel balls have been developed for maintenance-free use in conveyor belts, cam rollers and deflection rollers.
Plastic xiros® thrust bearing to absorb axial forces in confined spaces at a low price.
New toothed belt axis series
New Japanese standard in solid plastic
drylin® W double hybrid bearings in new sizes
drylin® W tandem housing for quick assembly
Trapezoidal lead screw nut made of iglidur® R
Choosing DryLin® linear bearings with service life calculation has never been so easy.
New E2 series with „iFlip“ hinge – strong, one-piece and inexpensive all-in-one – EF2.21
R2.75 – e-tube openable from both sides with 75 mm inner height.
Extender crossbar increases the innerheight up to 145 mm – E4.1 light
Lightweight, highly dynamic and costeffective additional widths and radii
Faster position also with E2/000.
The E2 micro standard, now with complete range and in ESD-version from stock
Biggest polymer e-chain® now ESD-version – E4.350
Product range extension – new widths of the film hinge-chains 074, 094
ISO Class 1 IPA certified CRC e-chain® for completely contamination-free energy supply systems in cleanrooms.
The igus® e-chain® for fast-moving gantry cranes – quiet, fast and low-abrasion
Aluminum construction kit: for P4 rol e-chain®
Even safer – now with 24V
A system for the transmission of data, media and signals - now „even easier“
Snap-open 3D-Robotics e-chain® with new, smaller size TRCF.85
New sizes and versions: „multi-energy spool“
Handling of the standard e-spool improved and new HD version.
Compact and inexpensive – for small spaces
Modular, smooth, space saving - guide media, energy and data vertically: small liftband
Automated coupling of e-chains® igus® coupling for harbor crane, e.g. RTG (Rubber Tired Gantry)
e-cord micro — for capillary tubes
With the e-chains® expert, configure complete e-chainsystems® for short or long travels and hanging applications.
"Design Oscars" for igus® products in the category "Industry Design"
Predictable reliability with guaranteed service life for e-chain® cables
Some 700 tests are being run in parallel at the test laboratory covering 2,750 m2, the largest of its kind for testing flexible cables.
chainflex® quality gains 3 new approvals: Germanischer Lloyd, EAC, CTP
CFRIP® makes it up to 50% quicker to strip jackets – now available on 215 more chainflex® cables
Expanded cross section range of shielded hybrid servo cables with integrated RS-485 standard.
chainflex® M – the low-cost, tested cable range. Now with UL approval.
chainflex® M PVC control cables - shielded and unshielded. From stock
chainflex® M iguPUR control cables -shielded and unshielded. From stock
chainflex® M PVC power cables now available with cross sections of up to 16 mm2
chainflex® M iguPUR power cables now available with cross sections of up to 16 mm2. From Stock.
chainflex® M iguPUR bus cable now also available as ASI bus profile. From stock
Optimised cable design makes them 30% quicker to assemble
New data cable series CF211.PUR with PUR outer jacket. From stock.
chainflex® CFPE cable range expanded to include a large cross section
chainflex® CFLG.G fibre optic cable especially for crane applications
The parameters of travel, bending radius and acceleration will give you the service life of the Chainflex® cable.
In addition to the existing standards and approvals, chainflex® cables now also meet the guidelines of NFPA, IEC and GL.
Easy quick release harnessed e-chains® in seconds, no tools required
Space-saving transport and safe storage of assembled e-chains®.
Protect and securely connect sensitive connectors.
Welcome to the world's largest selection of drive cables for moving applications.
6 DOF drive unit completely assembled in a steel housing.
Individual robolink D joints can also be combined – up to 6 DOF
1 DOF „shoulder" joint for additional rotation following standard 3rd axis joint, Typ TL2.
Maximum wear-resistance with the new iglidur® tribo filament for 3D printers as piece goods.
Heavy duty: iglidur® bearings up to 200 Mpa
General purpose endurance runner.
New sizes for the approved FDA-compliant bar stock material
The expansion from five to 16 full-range iglidur® materials is now also covered by the iglidur® product finder.
Choice of material and individual dimensions made easy.
New Dimensions for piston rings made from iglidur® J – other materials and dimensions on request
Variable: Fit the angle limit by yourself
New option: Standard drive versions now available in stainless steel
ESD-compliant iglidur® slewing ring bearings.
iglidur® H1 bar stock for special bearings and designs for extreme conditions
A service life increase from up to300% compared to iglidur® J, the topmaterial in terms of service life.
The specialist for extremely low coefficients of friction and minimum wear on anodized aluminum shafts.
New material for bar stocks, extremely resistant to liquid media.
xiros® flange ball bearings with stainless steel balls have been developed for maintenance-free use in conveyor belts, cam rollers and deflection rollers.
The complete solution combines lightweight, anodised aluminium tubes with maintenance-free and low-priced flange ball bearings made from xirodur® B180.
xiros® polymer ball bearings in new sizes
xirodur® B180 cages can be used as quiet-running, FDA-compliant and low-priced ball bearing cages for xirodur® B180 polymer ball bearings.
xiros® polymer ball bearings made from xirodur® T220 only use the materials ‘recommended’ by the tobacco industry.
The axial polymer ball caster enables you to transport higher loads than with our standard xiros® polymer ball casters.
xirodur® F180 polymer ball bearings – 2.0 update: conductive and FDA-compliant in one
Plastic xiros® thrust bearing to absorb axial forces in confined spaces at a low price.
Turn corners with rod end bearings of the dimensional Series E.
Save costs and time, precisely adjustable with left-hand/right-hand thread.
New slim spherical caps made of iglidur® materials for various metal bearing housings
Select easily and quickly among three options and supplement with your own data
drylin® SLN as a low cost liner module
Aluminium housing for square drylin® W profiles
drylin® W tandem housing for quick assembly
drylin® E7 liner in a new size of Ø 40 mm for steel shafts.
Corrosion-resistant stainless steel support included – EWUM(S)-ES
The new SAW mounting plate offers a variety.
dryspin® technology for high helix threads
dryspin® high helix thread in new sizes.
In the service life calculator, the nuts made of the material iglidur® R can be selected, calculated and ordered.
Precision linear module with compact carriage SHTC-08
Rapid manual adjustment for linear module SHT-08-FF
Smallest installation size now also available as a XY table
Square linear guide system, anti-torque and adjustable with a manual hand clamp in installation size 20
drylin® QWE adjustable guide carriage now in size 12
drylin® Q with integrated measuring system
drylin® W measuring system with freely positionable display
drylin® GRQ compact drive with variable proximity switch trigger.
Product range extended by low-cost end/reference switches.
Ready to install: drylin® linear module SLT with stepper and DC motors
drylin® E lead screw motors with dryspin® technology
Connection of drylin® stepper motors using offset construction kit.
New drylin® E drive unit for gantries.
Choosing DryLin® linear bearings with service life calculation has never been so easy.
Fair round tour with Artur Peplinski, Leader International Group Development & Marketing
* Click rates from igus® newsletter 2014
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!