DryLin® T linear guide systems were specially developed for applications in automation and handling systems. The design objective was a rugged linear guide for application in the most diverse - and also extreme - environments. They have the same dimensions as most recirculating ball bearing guides.
Technical data
| Gliding elements: | Maintenance-free |
| Material: | iglidur® J* |
| Max. surface speed: | 15 m/s |
| Operating temperature: | -40°C to +90°C |
| *Other materials on request |
Profile rail and base body of the carriage made of aluminum. The rail is hard-anodized, the aluminum base body of the carriage is clear anodized.
2Six gliding elements made of iglidur® J serve as guide bearings, which are positioned opposite to each other in pairs and make up 3 guide bearings.
3Alternatively, bearing clearance is continuously adjustable
4All steel parts are stainless steel
5The lid is made of solid plastic or stainless steel
100 % lubricant-free
Adjustable bearing clearance
Automatic clearance adjustment
High static load capacity
Service life up to 50,000 km without lubrication
High dirt resistance
Low vibration and low noise
The DryLin® T linear guide systems can be supplied with manual continuous clearance adjustment, as automatic, heavy-duty or low-profile versions.
DryLin® T - Adjustable clearance The DryLin® T standard version is supplied preset and can be put into operation at once. The user can also manually adjust or fine-tune the clearance of the linear guide. The individual adjustment for your application, as well as the potential to respond to uneven screw surfaces through specific clearance allowance.
DryLin® T - Automatic DryLin® T carriages of the automatic version have a mechanism that automatically adjusts the bearing clearance after removal of the preload key. In case a bearing clearance of more than 0.13 mm has to be adjusted during operation, the bearing clearance automatically resets itself when the carriage is completely unloaded.
DryLin® TW-HKA manual clampThe manual clamp has been developed for simple tasks. The creep behavior of the clamped plastic causes a slackening in clamping force over time (up to 70%). Therefore safety-related parts should not be clamped. Please approach our applications consultant if you require other options for the clamping.
Drylin® T - Heavy DutyThis series is used for the most extreme conditions such as dirt, adhesive residues, chips, mud, etc. The plastic gliding elements made of iglidur® J are fixed in the lid and are therefore non-detachable. This system is compatible with many standard commercial recirculating ball bearing systems and is available in the following sizes: TW-01-20, TW-01-25 and TW-01-30.
DryLin® T - Low-profile guide The clearance is not adjustable for the DryLin® T low profile guide rails. The gliding elements are mounted with positive fit in the chromated zinc carriage. This simple and effective design enables guides that are rugged and low-priced at the same time.
DryLin® T - Compact linear guideThis compact linear guide is suitable for rugged use (without clearance adjustment). This system has a slim design and the same dimensions as conventional recirculating ball bearing systems. The plastic gliding elements made of iglidur® J are fixed in the lid and are therefore undetachable. Suitable for DryLin® T guide rail of installation size 20.
DryLin® TWBM - Manual clamping with high holding forceThis manual clamping is designed for a long-lasting high holding force of up to 500 N per clamping element.
DryLin® T clamping elements for rail guideDryLin® T clamping elements for fast positioning by hand or with pneumatics.
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!