Series E1.18: new size
New inner width 18 mm. One-piece, very cost efficient and snap-open band chain.
News Autumn 2010
TwisterBand: new sizes
Rotary movements up to 3000° in smallest spaces. Compact, modular, economical
E-Chain® light: new inner height 86mm
Light and economical E-Chain® with high stability
E-Tube Series E4/00: new inner width
The successful E4/00 E-Tube program with 108mm inner height is now available with new 500mm inner width.
Chainflex® torsionable cables ex stock
The largest Chainflex® torsion cable range now in stock
Bar stock in new dimensions
Semi-finished products made of iglidur® A180 in ø 10, 20, 80, 100 mm
NEW! DryLin® gliding pads
DryLin® glide pads made of high-performance plastic iglidur® J available off stock.
DryLin® trapezoidal leadscrew nuts: new sizes
Completely lubrication-free and for heavy loads, now also with outer diameters 18, 36, 40, 50 mm.
DryLin® SHT and SLW with new transmission
The proven type series SHT-20 and SLW-2080 with new transmission TR18x8.
DryLin® linear table: new with ball bearing spindle
Absolutely lubrication-free. Allso available with steep thread TR10x12 or 10x50.
DryLin® stainless steel spindle linear units in new sizes
Ideal linear unit for aggressive environments now also as SLW-ESJ-2080 and SLW-ESA180-2080
NEW: Kit for quick connection to the motor
Fast and easy coupling of your motor with maintenance-free DryLin® linear units.
NEW! Ready-to-connect DryLin® linear units
Ready-to-use linear actuators for your step motor type NEMA 23
drylin® drive system configurator
Just enter useful application-data and compare adequate Linear Slide Tables online quickly and easily. Now including motors
e-chains® expert with cable finder
With the e-chains® expert, configure complete e-chainsystems® for short or long travels and hanging applications.
New products and line extensions spring/summer 2010
E-Chains®, Chainflex® and ReadyChain®
TwisterBand: new sizes
Rotary movements up to 3000° in smallest spaces. Compact, modular, economical
TwisterChain®
New generation of the igus® TwisterChain®: Rugged, quiet, for high loads
Triflex® R B+C-Version
4 times stronger, higher torsion forces, 50 % more with less effort
AUTO-GLIDE system
The AUTO-GLIDE system enables the avoidance of interfering guide troughs for use on long travels.
New range of
separators for E2/000
New range of separators for E2/000, cables last longer
Guidelok Slimline
Guidelok Slimline: Cost-effective and safe vertical guiding of E-Chains®
E-Chain® light: new inner height 86mm
Light and economical E-Chain® with high stability
New width R4.80 tube
The range of the flip-open and chip-tight igus® E-Tube R4.80 was further expanded.
CFB Plastic strain relief
connector system
Cables can be strain-relieved by
plastic fasteners in a confined space with PU components.
E4.350 new version
Enormous size, low displacement forces, now available as part of series
Carries heavy loads efficiently and safely
E-Rover: More safety on long travels
igus® E-Rover: E-ChainSystem® for power and data supply of rail-bound crane systems
P4.32 with new guide through
The igus® P4 roller Energy Chains® are the best solution for the longest travel at high speeds.
Enormous life time & clean room suitable
The enormous life time of the E6-joints has now been verified by a survey report, conducted by the FH Köln, Institute for Electrical Power Engineering.
Cable friendly separators
Line extensions of cable friendly separators for E2 micro series, E4/light and E6.
E1 mounting bracket
The product range of the all round E2/000 Tubes has been further enlarged.
Installation service
Ensure a faultless installation, avoid downtimes and additional costs ...
CF5 & CF6 PVC control cable
Chainflex® control cables CF5 und CF6 are now manufactured in a new cURus Style.
PVC-GigE-cables
The PVC Chainflex® Bus range and the PUR Chainflex® Bus range is extended by a new cable.
CFROBOT7
The Chainflex® Robot7 motor cable family has been extended by servo cables with shielded brake pairs.
CFROBOT5.500
The Chainflex® Robot family offers a new torsionable fiber glass cables for secure data transmission with 3D range.
CFFLAT
The CFFLAT cables are high flexible cables with a special braided core construction and are designed specificially for use in Micro Flizz®.
CF270.UL.D
The CF270.UL.D family is extended by two types, which meet the demands for particularly low capacitance superstructures.
Drive systems in 24h or today
Harnessed power-, servo-, control-, encoder-, network-, resolver, motor-, sensor- and path measurement
cables.
ready harnessed bus cables
90 new combinations of cable/connector for network technology in 3 qualities
igus®-connectors
On this page you´ll find the SUB-D service packs extension of our connectors program
Automatic filling
QuickChain filling
The new filling expert now creates the filling automatically.
e-chains® expert with cable finder
With the e-chains® expert, configure complete e-chainsystems® for short or long travels and hanging applications.
Service life
prediction for E-Chains® - QuickLife
With just a few clicks you will receive a statement about the expected service life of the E-Chain®.
QuickCable - Product finder for Chainflex® cables
In addition to the existing standards and approvals, chainflex® cables now also meet the guidelines of NFPA, IEC and GL.
QuickFluid hose cable
configurator
Choose from 28 types of hydraulic and industrial hoses, tubes and hose cables as well as a total of 200 fittings and configure your individual hose cable in few minutes.
QuickPin 2.0 connector-cable configurator
In only 3 minutes select from over 950 Chainflex® cables and 3000 connector components, configure cable online, order directly.
Polymer bearings - iglidur®, igubal®, DryLin® and xiros®
Piston rings
iglidur® piston rings: huge selection, every custom-made piston ring available within max. 10 days
MKM flange bushings
Install, flange, paint – the electrical conductivity allows the e-coating after mounting the bearing!
Bar stock in new dimensions
Semi-finished products made of iglidur® A180 in ø 10, 20, 80, 100 mm
PRT with tooth system
The standard for direct driving by toothed belt or rack and wheel.
PRT spacing rings
PRT spacing rings for slewing ring bearings in low-priced plastic version
B180 with cover plates
xiros® polymer ball bearings made of xirodur® B180 now with cover plate to prevent the penetration of dirt and other abrasive particles.
B180 Multi-axis plastic bearing
Is the multi-axis plastic bearing for realisation for linear and rotary movements
Axial ball bearings
xiros® axial ball bearings made of plastics for absorbing thrust forces.
Slewingballbearing
The combination of stainless steel balls with polymer inner and outer rings results in maintenance-free dry operation with low coefficients of friction.
Polymer ball transfer unit
xiros® polymer ball transfer unit made of xirodur® B180 for the lubricant-free transport of sensitive product.
Detectable spherical bearings
igubal® spherical bearings can be found quickly in case of misuse or crash of the system.
Double spherical bearings
igubal® variable double spherical bearings with metallic middle section…3designs and multi-options
Pillow block bearings
Pillow block bearings of the dimensional series E with split spherical ball and split housing.
Hybrid bearings
DryLin® W hybrid bearings in 2 new sizes ensure low driving forces - mainly required for manual adjustments - by a combination of gliding and rolling.
SHT linear tables and SHTP plastic linear tables with quick release
SHT linear tables and SHTP plastic linear tables with quick release mechanism offer a combination of accurate positioning and quick manual adjustment.
Quick release mechanism
Quick release mechanism: A combination of accurate positioning and quick manual adjustment with trapezoidal lead screw nut.
Leadscrewsstorage
Anodized aluminum bearing blocks of iglidur® L250. Design your own linear table.
DryLin® W rails
DryLin® W guide rails made of aluminum with a significantly reduced dead weight through machined recesses.
Guide carriage NW-12-27-80
The long guide carriage with threaded bore with size 27 completes the DryLin® N range.
DryLin® SET EasyTube
DryLin® SET EasyTube, the new linear unit is suitable for light, manual adjustment tasks.
DryLin® T clamping element
DryLin® T clamping elements for fast positioning by hand or with pneumatics.
SLW-1080 Cross
The new cross slide size based on the SLW-1080 offers favorable positioning.
SLW cross slide made of stainless steel
DryLin® SHT product expansion: SLW cross slide made of stainless steel
MONO carriage
The low-weight alternative to the SLW-0630 leadscrew table and the ZLW-0630 toothed belt drive
ZLW-0630-OD toothed belt drive
New installation size of the maintenance- and lubricant-free toothed belt axis for quick reverse positioning.
ZLW motor flange
Finally! Fix your NEMA motor to our ZLW toothed belt drive with a standard connection.
QuickSpecial - Special parts according to customer requirement
Choose from 8 iglidur® materials. Get moulded parts in 1 to 10 days, depending on complexity of the part.
QuickLife - Service life prediction for xiros® plastic ball bearings
With just a few inputs you will receive a statement about the expected service life of the xiros® Ball bearing.
News and line extensions archive
2009
2008
2007
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!