triflex® RS dresspack compact universal module for industrial robots

Universal module for all motions on the robot

triflex® RS dresspack is a very compact universal module that is mounted on fastening points available on the robot. The low installation height and the triflex® R chain guide parallel to the robotic arm, applications with extremely narrow installation space can also be implemented. triflex® RS dresspack with integrated pull-back spring is an excellent option to reliably implement the energy supply system on the robot head without cable stress.
We would be happy to visit your site and answer your queries on your specific application.
 

 
1: A space-saving module that can be quickly mounted on industrial robots
2: Integrated pull-back spring prevents loop formation
3: Dead stop for defined freedom of motion
4: Mounting brackets for reliable fastening
5: Gliding feed-through for a narrow and parallel guide on the robotic arm

triflex® R set dresspack - routed closely on the robotic arm for an extremely low profile

triflex® R set dresspack - routed closely on the robotic arm for an extremely low profile

 

with cover for the additional accommodation of control box or valve clusters

 


 

  • Standard pack for all applications, immediately installable
  • Integrated retaining spring
  • First choice for robotic applications with narrow installation room
  • Saves space through low installation height and close routing on robotic arm
  • Excellent service life
  • Universal use


 
The triflex® R set dresspack replaces almost all known and proven triflex® accessories such as the FlexBar system, universal assembly kit and fibre-rod module - all advantages are unified in the new triflex® R set dresspack.

triflex® RS - mounting location, right

 
The following optimal properties of triflex® R are also available in the universal triflex® RS dresspack module:

Installation advantages: Triflex® R can be extended or shortened, chain link by chain link

Easy to fill from the outside (TRE)

Fixed bending radius stop to prevent "cable stress"

High torsionability, up to 360° (TRC.70)

Clean interior separation, thanks to the two-chamber system

Free from getting stuck in the interfering edges (TRC)

High tensile strength thanks to the ball-socket connection (trailer principle)

Maintenance-free, without lubrication

No elaborate guide required

Triflex® RS Cover right/left Part.No.  
For series:        
         
TRC.40 without cover Right TRC.RS.40.R  
TRC.40 without cover left TRC.RS.40.L  
TRC.40 with cover Right TRC.RS.40.RC  
TRC.40 with cover left TRC.RS.40.LC  
TRE.40.B without cover Right TRE.RS.40.R.B  
TRE.40.B without cover left TRE.RS.40.L.B  
TRE.40.B with cover Right TRE.RS.40.RC.B  
TRE.40.B with cover left TRE.RS.40.LC.B  
         
TRC.60 without cover Right TRC.RS.60.R.  
TRC.60 without cover left TRC.RS.60.L  
TRC.60 with cover Right TRC.RS.60.RC  
TRC.60 with cover left TRC.RS.60.LC  
TRE.60.B without cover Right TRE.RS.60.R.B  
TRE.60.B without cover left TRE.RS.60.L.B  
TRE.60.B with cover Right TRE.RS.60.RC.B  
TRE.60.B with cover left TRE.RS.60.LC.B  
B = Replacement for predecessors A-version

Triflex® RS Cover right/left Part.No.
For series:      
         
TRC.70 without cover Right TRC.RS.70.R  
TRC.70 without cover left TRC.RS.70.L  
TRC.70 with cover Right TRC.RS.70.RC  
TRC.70 with cover left TRC.RS.70.LC  
TRE.70.B without cover Right TRE.RS.70.R.B  
TRE.70.B without cover left TRE.RS.70.L.B  
TRE.70.B with cover Right TRE.RS.70.RC.B  
TRE.70.B with cover left TRE.RS.70.LC.B  
         
TRC.85 without cover Right TRC.RS.85.R.  
TRC.85 without cover left TRC.RS.85.L  
TRC.85 with cover Right TRC.RS.85.RC  
TRC.85 with cover left TRC.RS.85.LC  
TRE.85.B without cover Right TRE.RS.85.R.B  
TRE.85.B without cover left TRE.RS.85.L.B  
TRE.85.B with cover Right TRE.RS.85.RC.B  
TRE.85.B with cover left TRE.RS.85.LC.B  

All RS pull-back systems with the open TRE version are shipped with triflex® R chains in the reinforced B version - please note this when ordering extension chains.

Triflex® RS Cover right/
left
Part.No.
For series:      
         
TRC.100 without cover Right TRC.RS.100.R  
TRC.100 without cover left TRC.RS.100.L  
TRC.100 with cover Right TRC.RS.100.RC  
TRC.100 with cover left TRC.RS.100.LC  
TRE.100.B without cover Right TRE.RS.100.R..B  
TRE.100.B without cover left TRE.RS.100.L.B  
TRE.100.B with cover Right TRE.RS.100.RC.B  
TRE.100.B with cover left TRE.RS.100.LC.B  
B = Replacement for predecessors A-version

 
 

Triflex® RS „Booster“

Increased pull back strength for small RS (RS40) sizes

For Triflex® RS
TRC/TRE.RS.40  Inquiry

3D CAD data:

Triflex® RS assembly instruction

Adapter brackets for Triflex® RS

Adapter brackets for 43 robots from stock

43 adapter bracket types from stock for many different robots

Free download of 3D CAD files for many brackets

For all Triflex® RS modules

For assembly to the side or on top

Go to selection of adapter consoles by robot manufacturer.  

Video examples:

 
 

Your contact

Jörg Ottersbach +49 2203 9649 688 Your requirements?

More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!


Contact
Other contact options

+49 (0) 2203-9649-0
Send e-mail to igus®
igus® contact
Back to the top