Triflex® RS
installation guide for TRC and TRE systemMount the pre-assembled Triflex® RS on the robot.
1
Entire system slideable sideways
Mounting without Triflex® RS adapter
If the hole pattern is identical to that of the robot, the Triflex® RS is directly mounted on the robot.Don't move cover positions
Mounting with Triflex® RS adapter
If the hole pattern is different than the robot or projecting edges, a Triflex® RS adapter is mounted between the robot and Triflex® RS and the Triflex® RS on top of it.Don't move cover positions
Mount moving end of Triflex® R chain and adjust length.
1
Use spacer blocks for TRE mounting brackets
Install mounting bracket with strain relief on the moving end and System komplett fasten Triflex® R.
1
Large hook outside
Normal model:
Fastening directly on the application and strain relief by means of cable ties on the strain relief teeth.
Heavy duty model:
Fastening on the additional axis on the robot. Strain relief through CFX strain relief clips on the double C rails
Optional: Mount protectors for projecting edges.
1
Protector
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!