DryLin® N miniature gliding systems - basics
DryLin® N low profile guide systems
DryLin® N low profile guide systems offer you low profiles in various widths. Like in all drylin® products, the carriage runs without lubrication in anodized aluminum profiles. The material used and the unique design make DryLin® N a cost-efficient and flexible guide system.
Technical data
| Gliding elements: | Maintenance-free |
| Material: | iglidur® J * |
| Max. surface speed: | 15 m/s |
| Operating temperature: | -40°C to +90°C |
| *Other materials on request |
1
Rail made of anodized aluminum
2Gliding elements made of iglidur® J or J200
3Carriage made of chromated zinc or plastic
4Carriage with threaded hole or through hole
Advantages:
Small installation height between 6 and 12 mm
Lightweight
Numerous carriage options – also with pretension
Maintenance-free, self lubricating
Corrossion-resistant
Low wear with low coefficient of friction
Rails in silver or black anodized
DryLin® N - Installation video of the gliding elements
Standard, preload and floating bearing
NW 17 = 17 mm rail width
The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications.
Variants: Standard, Preload (P), floating bearing (LL)
extrem low weight
Quiet running
Installation height 6 mm
up to 50 N load
NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series.
1. NW-01-27 standard 01 with through hole g
2. NW-02-27 standard 02 with threaded hole
3. Preload with through-hole or threaded hole
4. uinjection-molded with through-hole or threaded hole
5. NW-21-27-60P Vollkunststoffschlitten mit Durchgangsbohrung
6. NW-22-27-60P solid polymer carriage with through hole
7. NW-11-27-80 double carriage with through hole
NW 27 = 27 mm rail width
The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation.
NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged.
Over 20 carriage options
9.5 mm installation height
100% lubricant-free
iglidur® J plain bearing material
up to 500 N Last
Best selling linear guide
1. Standard 02 with threaded hole
2. Injection-molded with threaded hole
3. Standard 01 with through hole
NW 40 = 40 mm rail width
The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded.
Lightweight
Installation height 9,5 mm
high speeds are possible (up to 5 m/s)
iglidur® J plain bearing material
up to 700 N Last
1. Standard 02 with mounting nuts
2. Injection-molded with mounting nuts
NW 80 = 80 mm rail width
The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation.
Installation height 12 mm
100% lubricant-free
Wide torque support
up to 1000 N Last
Gliding elements made of iglidur® J or J200
Telescope system
Mounting rails: Anodized aluminum
Intermediate rail: Plastic
Options: Full extension, over extension (+ 20 mm), partial extension
Continuous lengths up to 1200 mm extended total length
Lubricant-free
Low noise
Corrosion resistant
From stock
End caps.
The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way.
Easy installation
Low-priced
Dismantling possible
High retention force
Low profile linear axis - SLN-27-01
SLN-27-01: Linear axis for manual operation with hand wheel
(SHT-HR-05-22-15-OG)
SLN-BB-27-01: Ball bearing linear axis for
manual adjustments with hand wheel 100 /
150 / 200 / 250 mm strokes
Small (installation height from 22 mm), light and flat
Plastic plain bearings in the bearing points
Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm
Manual and motorized operation
Low profile linear axis - SLN-27-02
SLN-27-02: Linear axis with NEMA11 stepper motor,
ball bearing spindle over motor bearing
SLN-BB-27-02: Ball bearing linear axis with
NEMA11 stepper motor
Small (installation height from 22 mm), light and flat
Plastic plain bearings in the bearing points
M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7
Manual and motorized operation
More than 100,000 products available! Delivery and Customer Service Mon-Fri from 8am-8pm and Sat from 8am-12pm!