When selecting cables, pay particular attention to
good abrasion and gliding properties. An ideal jacket material is TPE.
Recommendation: chainflex® cable CF9
twisterband
Installation guide for twisterband
TPE outer jacket
Dimensioning: Cable selection
Special shielded cables for the use in twisterband are in preparation. Please contact us if the use of shielded cables is essential
Dimensioning: Filling
twisterband-Version with lock:
TB20.44.18.x.01.0 | TB30.75.22.x.01.0
A = separate cables with crossbars
B = Insert cables sorted according to diameter
or bending radius. Insert thin,
small ones inward – then increasingly
bigger ones outward.
C = Not more than two cables on
top of each other.
10% of the larger diameter or a minimum
of 1 mm between
all cables
D = 10% of the larger diameter or a
minimum of 1 mm
between all cables
E = 10% of the larger diameter or a
minimum of 1 mm
between all cables and separators
twisterband version with easy locking:
TB12.23.09.x.01.0 | TB20.44.12.x.01.0
A = insert cables sorted according to diameter
or bending radius. Insert thin,
small ones inward – then increasingly
bigger ones outward.
B = A minimum of 1 mm or
10% of the larger diameter => Ø B
between all cables
C = Not more than 2 cables on top of
each other.
A minimum of 1 mm or
10% of the larger diameter
between all cables
Assembly: Mounting brackets
1. Insert twisterband between the steel parts.
2. Secure the twisterband by screwing the mounting bracket in place.
Assembly: guide shaft
Insert a centric shaft as a guide for vertical installation orientations starting at 1500° rotation angles.
Generally, insert a centric shaft as support for horizontal installation orientations.
Assembly: Strain relief
- Strain relief the cables on both ends
- Ensure that the cable tie lock does not
point in the direction of
the energy chain
Final position:
The twisterband must not be twisted up to the end. To avoid excessive strain on the cables, a min. reserve of 90° must be planned in front of each mounting point.
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!