The new iglidur® gliding material was developed specially for linear movements. Its strength is its long service life and the low wear rate on round bars of steel, chrome-plated steel and all sorts of stainless steel - hardened and unhardened shafts. The operating temperature is -30° to +80°C. iglidur ® E7 is offered as a liner for the 10-30 mm diameter and can be combined with all linear housings in the DryLin® R type series. The slotted geometry of the liners enables easy installation.
Good wear resistance on steel shafts
Easy to handle
Lubrication and maintenance-free
Ordering number | d1 | d2 | b1 | r | t | Z | Weight
[g] |
||
---|---|---|---|---|---|---|---|---|---|
![]() |
10 | 12 | 28 | 3 | 0.8 | 2.5 | 0.73 | Upon request | ![]() |
![]() |
12 | 14 | 31 | 3 | 0.8 | 3 | 1.01 | Upon request | ![]() |
![]() |
16 | 18 | 35 | 3.5 | 0.8 | 3.5 | 1.45 | Upon request | ![]() |
![]() |
20 | 23 | 44 | 5 | 0.8 | 3.5 | 3.25 | Upon request | ![]() |
![]() |
25 | 28 | 57 | 5 | 0.8 | 4 | 5.44 | Upon request | ![]() |
![]() |
30 | 34 | 67 | 5 | 0.8 | 4 | 9.88 | Upon request | ![]() |
![]() |
40 | 44 | 79 | 6 | 1.3 | 5 | 17.3 | Upon request | ![]() |
![]() |
50 | 55 | 99 | 7 | 1.3 | 6 | 36.3 | Upon request | ![]() |
![]() |
60 | 65 | 124 | 8 | 2.5 | 6.5 | 54.8 | Upon request | ![]() |
More about selected part: | |||||||||
3D-CAD![]() ![]() ![]() ![]() ![]() ![]() |
Available on request
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!