Comprehensive product extension to the new high load bearing up to Ø75mm.
Even higher loads
Application areas: Agricultural technology, utility vehicles, construction equipment, fixture construction, general mechanical engineering
Due to the tremendous response, the standard range of the lubricant-free heavy-duty material iglidur® Q2 launched last year is comprehensively extended. The iglidur® Q2 bearings with and without flange are now available for all common shaft diameters up to 75 mm. Made for heavy-duty pivoting applications under extreme conditions.
Lubricant- and maintenance-free
Wear-resistant and shape-stable with high loads
Rugged in dirt and dust
Good cost/performance ratio
Application areas: Agricultural technology, utility vehicles, construction equipment, fixture construction, general mechanical engineering
Materials table
| General features | |
|---|---|
| Density | 1,46 g/cm3 |
| Colour | beige-brown |
| Max. moisture absorption at 23 °C and 50 %r.h. | 1,1 weight-% |
| Max. water absorption | 4,6 weight-% |
| Mechanical properties | |
|---|---|
| Max. permissible static surface pressure (+20 °C) | 120 MPa |
| Shore D hardness | 80 |
| Physical and thermal properties | |
|---|---|
| Upper long-term application temperature | 130 °C |
| Upper short-term application temperature | 200 °C |
| Lower application temperature | -40 °C |
| Electrical properties | |
|---|---|
| Surface resistance | > 1011 Ω |
(German)
Plain bearings, cylindrical
plain bearing with flange
Dimensions according to ISO 3547-1 and special dimensions
Chamfer depending on d1
| d1 [mm] | f [mm] |
|---|---|
| Ø 1-6 | 0,3 |
| Ø 6-12 | 0,5 |
| Ø 12-30 | 0,8 |
| Ø > 30 | 1,2 |
Delivery program:
Available ex stock
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!