Replace elaborately stamped PTFE tapes with a single clip-on guide ring, such as in lifting elements, control valves and fittings. We offer iglidur® piston rings made of freely selectable materials for a wide range of applications.
Special properties
Easy to assemble
Low-priced
More wear-resistant than PTFE-bonds
Higher load capacity
Defined dimensions
different materials per ex. iglidur® J, J350…
When to use piston rings?
When piston rings with excellent wear properties are required
When simple assembly is of great importance
When high edge loads occur
When tailor-made solutions based on iglidur® materials are required
When the piston rings should seal simultaneously
When different diameters should be covered by one part
Installation recommendations for housings
| Dimensions [mm] | dS (h-tolerant) [mm] |
dG (h-tolerant) [mm] |
bg [mm] |
|---|---|---|---|
| Nominal diameters | dS = d1 | dG = d2 | bG = b1 +0,2 |
| Dimensions [mm] | dG (h-tolerant) [mm] |
dH (h-tolerant) [mm] |
bg [mm] |
|---|---|---|---|
| Nominal diameters | dG = d1 | dH = d2 | bG = b1 +0,2 |
| Part. No. | Inner Ø | Outer Ø | Piston ring width | Gaps width | Slotted bevel | |||
|---|---|---|---|---|---|---|---|---|
| d1 [mm] |
d2 [mm] |
b1 [mm] |
b2 [mm] ± 0,5mm |
T [°] |
||||
 JPRM-0608-06 |
NEW | 6 | 8 | 6 | 1 | 0 | Upon request |  |
| JPRM-0810-10 |
NEW | 8 | 10 | 10 | 1 | 0 | Upon request | |
 JPRM-1012-054 |
- | 10 | 12 | 5.4 | 2.5 | 20 | Upon request | |
| JPRM-1214-054 |
- | 12 | 14 | 5.4 | 2.5 | 0 | Upon request | |
| JPRM-1416-054 |
- | 14 | 16 | 5.4 | 2.5 | 0 | Upon request | |
| JPRM-1416-10 |
NEW | 14 | 16 | 10 | 1 | 20 | Upon request | |
| JPRM-1618-054 |
- | 16 | 18 | 5.4 | 2.5 | 20 | Upon request | |
| JPRM-1722-054 |
- | 17 | 22 | 5.4 | 1 | 25 | Upon request | |
| JPRM-2023-054 |
- | 20 | 23 | 5.4 | 2.5 | 20 | Upon request | |
| JPRM-2528-054 |
- | 25 | 28 | 5.4 | 2.5 | 20 | Upon request | |
| JPRM-2832-10 |
NEW | 28 | 32 | 10 | 1 | 20 | Upon request | |
| JPRM-2832-20 |
NEW | 28 | 32 | 20 | 1 | 20 | Upon request | |
| JPRM-2833-054 |
- | 28 | 33 | 5.4 | 1 | 25 | Upon request | |
| JPRM-3034-054 |
- | 30 | 34 | 5.4 | 2.5 | 20 | Upon request | |
| JPRM-3539-054 |
- | 35 | 39 | 5.4 | 2.5 | 20 | Upon request | |
| JPRM-3540-054 |
- | 35 | 40 | 5.4 | 1 | 25 | Upon request | |
| JPRM-4044-054 |
- | 40 | 44 | 5.4 | 2.5 | 20 | Upon request | |
| JPRM-4550-054 |
- | 45 | 50 | 5.4 | 2.5 | 20 | Upon request | |
| JPRM-4550-10 |
NEW | 45 | 50 | 10 | 2 | 0 | Upon request | |
| JPRM-5055-054 |
- | 50 | 55 | 5.4 | 2.5 | 20 | Upon request | |
| JPRM-5055-10 |
NEW | 50 | 55 | 10 | 2 | 0 | Upon request | |
| JPRM-5863-095 |
- | 58 | 63 | 9.5 | 1 | 25 | Upon request | |
| JPRM-6065-054 |
- | 60 | 65 | 5.4 | 2.5 | 20 | Upon request | |
| JPRM-7075-054 |
- | 70 | 75 | 5.4 | 2.5 | 20 | Upon request | |
| More about selected part: | ||||||||
3D-CAD
Sample request
PDF
Quote request
Price list
myCatalog
|
||||||||
Piston rings as desired
Piston rings in desired material and dimensions based on the entire iglidur® bearings catalog range Available in a maximum of ten days, economically produced by injection molding and machined to the required dimensions.
Preferred iglidur® materials:
iglidur® J: universel
iglidur® A180: FDA-compliant
iglidur® J4: Low cost
iglidur® J350: > +90°C
iglidur® X: chemicals, high temperatures
Structure of the order number
b1: Desired length
Inner and outer Ø (d1 and d2) made using standard plain bearings*
M for metric
PRfor piston ring
iglidur® desired material
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!
)
)
)