1. Practical: traversable floor guide
2. Reliable tracking : Assembled gliding tab feeds the e-chain®
3. Smooth operation: Offset tracking of upper and lower run
4. Guided reliably: Comb-like autoglide crossbars
5. Versatile: KMA circumferential mounting
Version 1: autoglide for e-chainsystems® E4 up to 56 mm inner height
Version 1 is available for the larger e-chain® of the System E4 – In this, the crossbars in the inner radius of the chain is provided with injection-molded glide shoes. The length of the E-Chain® in AUTOGLIDE can correspond to the entire travel distance plus surcharge for the bending radius. They can also be mounted in the middle of the travel as before. In this case, cost-efficient glide pads are mounted for the other half of the track.
E-Chain® with crossbars at every link, snap-open on both sides
Series E4.32.AG
Inner height Hi: 32 mm
Inner width Bi: 112 - 262 mm
Bending radii R: 100 - 300 mm
Series E4.42.AG
Inner height Hi: 42 mm
Inner width Bi: 112 - 262 mm
Bending radii R: 100 - 300 mm
Series E4.56.AG
Inner height Hi: 56 mm
Inner width Bi: 112 - 262 mm
Bending radii R: 135 - 500 mm
Accessories for the E4 autoglide system
Simple guide elements for quick installation on the subsurface are available for the autoglide system version 1. The traversable excentric floor guides (1) are fastened every 2 m on the subsurface. The glider (2) fastened on the moving end feeds the E-Chain® and holds it securely in the track. The autoglide crossbars (3) safely guide the E-Chain® and replace the guide trough.
Save purchase and installation costs with this system.
For travel distances over 10 m
Traversable over floor guide
Note: Only 2 gliders AG.XXX. OF required for the safe feeding of the E-Chain®. The mounting of the glider is done on the outer link of the upper run, which is laid down first on the lower run.
InquiryMore than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!