For years the igus® motto has been "plastics for longer life®". By this we mean the production of innovative plastic products which reduce maintenance work, achieve technical improvements, at the same time as reducing costs and increasing service life, everything delivered immediately from stock.
The E-ChainSystems® today clearly contribute toward reliability, as system downtimes, for example through cable breaks, are reduced to zero.
Previously used cables from a competitor had failed; since then the temperature-resistant Chainflex® cables are used; the larger-than-life size LED screen in Dallas functions in any weather.
Even in particularly aggressive ambient conditions like in this high speed machining center, energy supply systems prove their reliability.
As iglidur® plain bearings have a long service life, and in addition need not be lubricated and costs only a fraction compared to conventional bearings, 90% of the costs could be saved.
The previously used bearings were blocked and the shafts used to break. The lubricant-free igubal® flange bearings used instead have been operating since May 2007 without failure. This saved Euro 2,440 in repair costs and Euro 8,400 in machine stoppages each year.
Due to the dirt accumulation in the ball bearings, the balls were blocked and the shafts were destroyed. The concrete cutting machine has now run for over three years entirely free of troubles despite the extremely heavy-duty operation.
By the use of Triflex® RS, the start-up of a complete system for robot-aided production of household appliances could be shortened from 12 to 4 hours.
Highly flexible Chainflex® control cables are used in this application in TV production.
The technical demands on energy supply systems in machinery and plant construction require cables that work reliably.
Energy supply systems demonstrate their reliability even in particularly aggressive environmental conditions in special-purpose machinery construction.
The energy supply systems and cables for extreme requirements in the linear drive technology were used here.
Triflex® R as a complete solution for several tasks at once on a suspended robot
Various Chainflex® cables and Energy Chains® are used in the "Speedmounter".
Automotive industry: flexible linear sliding system for automatic welding cap changer.
The high fail-safety of the E-Chains® and Chainflex® cables were the reason igus® products were used in this case.
This robot in a car factory is the “supervisor” over five smaller robots that supply it.
This system is used to press toothed wheels onto shafts under heat. Then the still hot shaft is brought to the cooling station by a linear guide.
E-Chain® product replaces competitor's product because of constant downtimes. Our advantage: High lateral stability and higher service life.
Due to the relatively high dynamic values, a guidelok slimline F was used for the safe guiding of the energy chain® in this storage and retrieval machine with a lifting height of 6 meters.
Containers are unloaded in a highly dynamic and semi-automated manner. The e-chains® are able to support these dynamic forces.
This self-guiding transportation system is intended for logistics automation tasks.
Automated work processes on grape-vines in difficult terrain.
Two air-conditioned zones for storing pharmaceuticals and transporting these to the dispensing station.
No more cork screws and cable failures when transporting roof shingles.
Automobiles are parked and subsequently retrieved without the driver's involvement.
Precise positioning of products in shelves while subject to dirt exposure.
Robot energy chain Triflex® R in test equipment for the pharmaceutical industry.
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!