Flange housing made of anodized aluminum, round or angular flange
Liner JUM-02 made of iglidur® J is included as standard
Recommended tolerance for the shaft: h6-h10
Also available with the following liners: XUM-02: for high temperatures, iglidur® X material – e.g. : FXUMT-01-16; JUM-12: With reduced bearing clearance, iglidur® J material – e.g. : FJUMT-11-16
|
Part No.: |
|
| d1 [mm]: | |
| Order no. | Size Nominal diameter |
Tolerance bearing inner diameter |
Guide length | proj. bearing surface | Weight | ||
|---|---|---|---|---|---|---|---|
| [mm] | [mm] | [mm] | [mm²] | [g] | |||
 FJZMT-01-08 |
8 | 0,032-0,070 | 45 | 256 | 27.13 | Upon request |  |
| FJUMT-01-10 |
10 | 0,030-0,080 | 52 | 250 | 43.75 | Upon request | |
| FJUMT-01-12 |
12 | 0,030-0,080 | 57 | 324 | 57 | 44.12 USD | |
| FJUMT-01-16 |
16 | 0,030-0,080 | 70 | 464 | 78.82 | 46.32 USD | |
| FJUMT-01-20 |
20 | 0,030-0,091 | 80 | 580 | 126.42 | 53.41 USD | |
| FJUMT-01-25 |
25 | 0,030-0,091 | 112 | 975 | 248.85 | 60.77 USD | |
| FJUMT-01-30 |
30 | 0,030-0,110 | 123 | 1470 | 388.37 | 103.25 USD | |
| FJUMT-01-40 |
40 | 0,030-0,115 | 151 | 2360 | 835 | 137.67 USD | |
| FJUMT-01-50 |
50 | 0,030-0,130 | 192 | 3450 | 1352.3 | Upon request | |
| More about selected part: | |||||||
3D-CAD
Sample request
Experts
PDF
Quote request
Price list
myCatalog
|
|||||||
| Order no. | Size Nominal diameter |
Tolerance bearing inner diameter |
Guide length | proj. bearing surface | Weight | ||
|---|---|---|---|---|---|---|---|
| [mm] | [mm] | [mm] | [mm²] | [g] | |||
| FJZMT-02-08 |
8 | 0,032-0,070 | 45 | 256 | 23 | Upon request | |
| FJUMT-02-10 |
10 | 0,030-0,080 | 52 | 250 | 36.58 | Upon request | |
| FJUMT-02-12 |
12 | 0,030-0,080 | 57 | 324 | 48.19 | 45.84 USD | |
| FJUMT-02-16 |
16 | 0,030-0,080 | 70 | 464 | 67.79 | Upon request | |
| FJUMT-02-20 |
20 | 0,030-0,091 | 80 | 580 | 110.06 | 53.41 USD | |
| FJUMT-02-25 |
25 | 0,030-0,091 | 112 | 975 | 230.06 | 69.40 USD | |
| FJUMT-02-30 |
30 | 0,030-0,110 | 123 | 1470 | 350.74 | 103.25 USD | |
| FJUMT-02-40 |
40 | 0,030-0,115 | 151 | 2360 | 739.3 | 107.73 USD | |
| FJUMT-02-50 |
50 | 0,030-0,130 | 192 | 3450 | 1249.3 | Upon request | |
| More about selected part: | |||||||
|
3D-CAD
Sample request
Experts
PDF
Quote request
Price list
myCatalog
|
|||||||
| Order no. | d1 | d2 | d3 | dt | k | B | Bf | ts | db | ds |
|---|---|---|---|---|---|---|---|---|---|---|
| [mm] | [mm] h7 | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | |
| FJZMT-01-08 |
8 | 16 | 32 | 24 | 25 | 45 | 8 | 3.1 | 3.5 | 6,0 |
| FJUMT-01-10 |
10 | 19 | 39 | 29 | 30 | 52 | 9 | 4.1 | 4.5 | 7,5 |
| FJUMT-01-12 |
12 | 22 | 42 | 32 | 32 | 57 | 9 | 4.1 | 4.5 | 7,5 |
| FJUMT-01-16 |
16 | 26 | 46 | 36 | 35 | 70 | 9 | 4.1 | 4.5 | 7,5 |
| FJUMT-01-20 |
20 | 32 | 54 | 43 | 42 | 80 | 11 | 5.1 | 5.5 | 9,0 |
| FJUMT-01-25 |
25 | 40 | 62 | 51 | 50 | 112 | 11 | 5.1 | 5.5 | 9,0 |
| FJUMT-01-30 |
30 | 47 | 76 | 62 | 60 | 123 | 14 | 6.1 | 6.6 | 11,0 |
| FJUMT-01-40 |
40 | 62 | 98 | 80 | 75 | 151 | 18 | 8.1 | 9 | 14,0 |
| FJUMT-01-50 |
50 | 75 | 112 | 94 | 88 | 192 | 18 | 8.1 | 9 | 14,0 |
| More about selected part: | ||||||||||
|
3D-CAD
Sample request
Experts
PDF
Quote request
Price list
myCatalog
|
||||||||||
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!
)