iglidur® J260 Tribo-Filament
The new Tribo-Filament iglidur® J260 is the first standard
igus® material that is printable, available as bar
stock and injection molding part. Now it is possible
to produce parts quickly and cost-effective from 1 off
with the same material characteristics from the prototyping-
phase until the mass production.
Wear resistant, especially in connection with polymer shafts
Higher temperature resistance: up to +120 °C
Good chemical resistance
Suitable for any 3D printer using FDM
Diameter: 1,75 mm and 3 mm
From prototyping-phase to mass production
Steering system
i.e. wiper lever
Material table
| iglidur® J260-PF | |
|---|---|
| Colour | yellow |
| moisture absorption at 23 °C and 50 %r. h. | 0,2 weight-% |
| Max. water absorption | 0,4 weight-% |
| Max. long term application temperature | +120 °C |
| Max. short term application temperature | +140 °C |
| Minimum application temperature | -100 °C |
| Part Number | ||
|---|---|---|
| J260-PF-0175-0025 (1) | Upon request |  |
| J260-PF-0300-0025 (1) | Upon request | |
| J260-PF-0175-0250 | Upon request | |
| J260-PF-0300-0250 | Upon request | |
| More about selected part: | ||
3D-CAD
Sample request
Quote request
Price list
myCatalog
|
||
Delivery
from stock/ex stock
Processing instructions and more information
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!