By using our webpages, you agree to our use of cookies. OK

iglidur® AB: First antibacterial iglidur® plain bearing

... iglidur® – antibacterial* …

Plain bearings made of iglidur® AB help to reduce the microbial load in difficult to access bearing points.

Lubricant- and mainteance-free

Continuous up to 70℃

Good resistance to media

Universally usable

Typical applications:Medical technology, laboratory technology, ventilation systems, sanitary furniture and equipment, bearings of patient and care furniture

* According to test results for antimicrobial effectiveness in accordance with ISO 22196:2011

Dimensions according to ISO 3547-1 and special dimensions

Chamfer in relation to the d1

d1 [mm]	f [mm]
Ø 1–6	0,3
Ø 6–12	0,5
Ø 12–30	0,8
Ø > 30	1,2

Material table

General features
Density	1,11 g/cm³
Colour	yellow
moisture absorption at 23 °C and 50 %r.h.	0,8 weight-%
Maximum water absorption	1,6 weight-%
Mechanical Properties:
Bending E-module	1850 MPa
Bending strength	50 MPa
Max. recommended surface pressure at room temperature	25 MPa
Shore-D-hardness:	70
Thermal properties
Max. long term application temperature	+70 °C
Max. short term application temperature	+140 °C
Max. short term ambient temperature	+150 °C
Minimum application temperature	-40 °C
Electrical Properties:
Specific forward resistance	> 12¹⁰ Ωcm
Surface resistance	> 10¹² Ω

Part Number	d1	d1 tolerance		d2	b1
ABSM-0608-06	6	+0,020	+0,068	8	6	Upon request
ABSM-0810-10	8	+0,025	+0,083	10	10	Upon request
ABSM-1012-10	10	+0,025	+0,083	12	10	Upon request
ABSM-1214-15	12	+0,032	+0,102	14	15	Upon request
ABSM-1517-15	15	+0,032	+0,102	17	15	Upon request
ABSM-2023-20	20	+0,040	+0,124	23	20	Upon request
More about selected part:
3D-CAD Sample request Experts Quote request Price list myCatalog

* After pressfit of the bearing in a housing with nominal dimension, the inner diameter of the bearings adjusts itself to an E10 tolerance.

Part Number	d1	d1 tolerance		d2	d3	b1	b2
ABFM-0608-08	6	+0,020	+0,068	8	12	8	1	Upon request
ABFM-0810-09	8	+0,025	+0,083	10	15	9.5	1	Upon request
ABFM-1012-12	10	+0,025	+0,083	12	18	12	1	Upon request
ABFM-1214-12	12	+0,032	+0,102	14	20	12	1	Upon request
ABFM-1517-12	15	+0,032	+0,102	17	23	12	1	Upon request
ABFM-2023-21	20	+0,040	+0,124	23	30	21.5	1.5	Upon request
More about selected part:
3D-CAD Sample request Experts Quote request Price list myCatalog

* After pressfit of the bearing in a housing with nominal dimension, the inner diameter of the bearings adjusts itself to an E10 tolerance.

Delivery

from June

News 2015

What did you think of this news? Was it innovative and interesting?

More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!

No minimum order value Delivery from 24h* 7⁰⁰ - 20⁰⁰ Delivery+Consultation Free samples Is something not to your liking? / Feedback