By using our webpages, you agree to our use of cookies. OK

guidefast

Economical energy supply for crane girders and indoor cranes -
quickly installed as a modular kit solution

The guidefast guide trough is mounted on the side of the crane carriage. In case of installation on crane girders one can omit the welding of brackets. Installation times are kept very short, as the guide trough only needs to be mounted in the previously fixed brackets and then fixed with the clamping blocks. The small amount of various components and the fixed trough width also contribute to a simple installation.

Fast and simple fastening by means of clamping rails

Single-part steel trough with 2 m standard length

Abrasion-resistant: gliding bar for center-mounted feed

Guide trough segments are connected with clips, avoiding misalignment

Clever: 2 version retainer with integrated strain relief

Reduce your installation time by up to 80% compared to conventional guide systems

Fits virtually any standard crane girder

2 version retainer with integrated strain relief, for fixed routing of cables on the crane carriage ± 5mm vertical tolerance of the retainers

For standard trough length of 2.0 m - with or without glide bar

Can be used for any side mounted application - not limited to cranes

Installation-friendly due to prefabricated bore patterns of the e-chain® mounting brackets

Standard material: galvanized steel. Also available in stainless steel. Material grade 1.4301 or black powdercoat

Long-term tested to withstand vibration and rough environment

Component retainer set
A - Version 01 - short retainer
B - Version 02 - long retainer
C - Clamping blocks, Part No. G9.2.10

Ba = e-chain® outer width
Bi = e-chain® inner width
ha = e-chain® outer height
BRi = Inner trough width = BRi ≥ Ba + 4

2 versions: Retainer with integrated strain relief:
A - Version 01 - short retainer
B - Version 02 - long retainer

Components - guidefast Set1. Trough profile, 2 m each
2. Plastic glide bar, 2 m each, optional
3. Clip, Part No. 908.467

Guide troughs

Standard length: 2000 mm

Standard material: Galvanized steel

Each element has one opening for cable feed

Version with installed glide bars is also available

Different part number according to size - please see details in the table below


Part No.:
Width [mm]:

Article number	Width	Inner width trough	For e-chain®:	with or without	A	B
		BRi [mm]		Glide bar	[mm]	[mm]
GF91.30.025.2000	81	42.5	1500.025.RRR.0	without glide bar	61	81	Upon request
GF91.30.050.2000	106	67.5	1500.050.RRR. 0	without glide bar	61	106	Upon request
GF92.30.03.2000	0	58	2500.03.RRR.0	without glide bar	75	96.5	Upon request
GF92.30.05.2000	116	77	2500.05.RRR.0	without glide bar	75	115.5	Upon request
GF92.30.07.2000	136	97	2500.07.RRR.0	without glide bar	75	135.5	Upon request
GF92.30.09.2000	0	109	2500.09.RRR.0	without glide bar	75	147.5	Upon request
GF92.30.10.2000	162	123	2500.10.RRR.0	without glide bar	75	161.5	Upon request
GF95.30.05.2000	109	70	2700.05.RRR.0	without glide bar	105	108.5	Upon request
GF95.30.07.2000	134	95	2700.07.RRR.0	without glide bar	105	133.5	Upon request
GF95.30.10.2000	159	120	2700.10.RRR.0	without glide bar	105	158.5	Upon request
GF91.31.025.2000	81	42.5	1500.025.RRR.0	with glide bar	61	81	Upon request
GF91.31.050.2000	106	67.5	1500.050.RRR. 0	with glide bar	61	106	Upon request
GF92.31.03.2000	0	58	2500.03.RRR.0	with glide bar	75	96.5	Upon request
GF92.31.05.2000	116	77	2500.05.RRR.0	with glide bar	75	115.5	Upon request
GF92.31.07.2000	136	97	2500.07.RRR.0	with glide bar	75	135.5	Upon request
GF92.31.09.2000	0	109	2500.97.RRR.0	with glide bar	75	147.5	Upon request
GF92.31.10.2000	162	123	2500.10.RRR.0	with glide bar	75	161.5	Upon request
GF95.31.05.2000	109	70	2700.05.RRR.0	with glide bar	105	108.5	Upon request
GF95.31.07.2000	134	95	2700.07.RRR.0	with glide bar	105	133.5	Upon request
GF95.31.10.2000	159	120	2700.10.RRR.0	with glide bar	105	158.5	Upon request
More about selected part:
3D-CAD Catalog Quote request Price list myCatalog

Bracket short version

Delivery including clamping block and screw

Clamping block, incl. conductivity - available as per DIN EN 61537: Standard

Few fastening options for permanently laid cables, therefore more space-saving than the long version

Standard support interval: 1 bracket per meter


Part No.:

Article number
GF9.2.12	guidefast, short bracket version – standard clamping block	Upon request
GF9.2.12.CD	guidefast, short bracket version – clamping block with conductivity	Upon request
More about selected part:
3D-CAD Catalog Quote request Price list myCatalog

Vertically and horizontally adjustable

Bracket long version

Delivery including clamping block and screw

Clamping block, incl. conductivity - available as per DIN EN 61537: Standard

Lots of extra fastening options for permanently laid cables

Standard support interval: 1 bracket per meter


Part No.:

Article number
GF9.2.11	guidefast, long bracket version – standard clamping block	Upon request
GF9.2.11.CD	guidefast, long bracket version – clamping block with conductivity	Upon request
More about selected part:
3D-CAD Catalog Quote request Price list myCatalog

Bracket with integrated strain reliefs for the installation of permanently laid cables on the crane girder.

Connector

Delivers an uninterrupted connection of two trough pieces

Installed with a rubber mallet

By ordering the guidefast trough >1000 mm a connector is included.


Part No.:

Article number
908.467	Upon request
More about selected part:
3D-CAD PDF Quote request Price list myCatalog

Quickly mounted with a few hand movements - the guidefast guide trough.

Installation through weld-on bolt or screw/thread directly on the crane girder.

More information:

E2/000 overview

chainflex cables - product overview

More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!

No minimum order value Delivery from 24h* 7⁰⁰ - 20⁰⁰ Delivery+Consultation Free samples Is something not to your liking? / Feedback