Series 07 ESD
Inner height hi: 10,3 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
ESD & ATEX - e-chains®
The requirements for the prevention of static charges in applications have been increasingly growing in modern production facilities. Essentially, there are two reasons for this:
ESD
Avoidance of static charges in the field of manufacturing processes of electronic components or assemblies
ATEX
Prevention of ignitable static charges in explosive environment
Your benefits with ESD products
ESD material tested with over 10 million cycles for the highest requirements
Snap-open energy chains® with mounting brackets and interior separation in ESD and ATEX version available from stock.
Standardized product - igumid ESD with PTB certificate
Proven for years during use in explosion protection areas
Short delivery times: 7.00 - 20.00 hours - ordering and delivery service
As early as 1992, the igus® GmbH, together with the PTB (Physikalisch-Technische Bundesanstalt) in Braunschweig, conducted measurements of the electrical surface leakage resistance for igus® e-chains® with the special material igumid GC, supplemented by additional certifications in 1998 and 1999 according to DIN 53482 and the guidelines for static electricity "ZH1/200" of the Federation of Trade Associations. In the course of further innovation, the material igumid ESD was certified by the PTB (Physikalisch-Technische-Bundesanstalt) in May 2002. In its properties the material igumid ESD combines the requirements of the ESD as well as ATEX factors. In some mechanical requirements, the igumid ESD surpasses even the standard material igumid GLW and has been tested in the igus® technical center with over
10 million cycles.
zipper ESD
zip-open fast
Series 09 ESD
Inner height hi: 15 mm
Inner widths Bi: 16 - 50 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
E2 micro ESD
smallest dimension
Serie E2C.10 ESD
Inner height hi: 10,5 mm
Inner width Bi: 16 - 30 mm
Bending radius R: 18 - 38 mm
Pitch: 20 mm
Serie E2C.15 ESD
Inner height hi: 15 mm
Inner width Bi: 16 - 30 mm
Bending radius R: 28 - 48 mm
Pitch: 20 mm
E2/000 ESD
energy chains® in two parts for a large range of applications
Series 1500 ESD
Inner height hi: 21 mm
Inner widths Bi: 15 - 80 mm
bending radii R: 38 - 145 mm
Pitch: 33,3 mm
Series 2500 ESD
Inner height hi: 25 mm
Inner widths Bi: 25 - 125 mm
bending radii R: 55 - 175 mm
Pitch: 46 mm
Series 2700 ESD
Inner height hi: 35 mm
Inner widths Bi: 50 - 125 mm
bending radii R: 63 - 150 mm
Pitch: 56 mm
E4.1 ESD
ONE series for almost all applications
Series E4.21 ESD
Inner height hi: 21 mm
Inner widths Bi: 30 - 70 mm
bending radii R: 048 - 100 mm
Pitch: 30,5 mm
Series E4.28 ESD
Inner height hi: 28 mm
Inner widths Bi: 40 - 125 mm
bending radii R: 055 - 125 mm
Pitch: 46 mm
Series E4.32 ESD
Inner height hi: 32 mm
Inner widths Bi: 50 - 200 mm
bending radii R: 063 - 250 mm
Pitch: 56 mm
Series E4.42 ESD
Inner height hi: 42 mm
Inner widths Bi: 50 - 200 mm
bending radii R: 075 - 250 mm
Pitch: 67 mm
Series E4.56 ESD
Inner height hi: 56 mm
Inner widths Bi: 75 - 300 mm
bending radii R: 135 - 250 mm
Pitch: 91 mm
Series E4.80 ESD
Inner height hi: 80 mm
Inner widths Bi: 75 - 300 mm
bending radii R: 200 - 300 mm
Pitch: 111 mm
E4/light ESD
light, rugged and cost-effective
Series 14240 ESD
Inner height hi: 62 mm
Inner widths Bi: 50 - 200 mm
bending radii R: 150 - 250 mm
Pitch: 91 mm
Series 15050 ESD
Inner height hi: 80 mm
Inner widths Bi: 75 - 300 mm
bending radii R: 150 - 250 mm
Pitch: 91 mm
triflex® R ESD
specially made for robotic applications, closed design
Series TRC.40 ESD
Inner height Bi 1: 15 mm
Inner height Bi 2: 13 mm
Bending radius R: 58 mm
Pitch: 13,9 mm
Series TRC.60 ESD
Inner height Bi 1: 22,5 mm
Inner height Bi 2: 19,5 mm
Bending radius R: 87 mm
Pitch: 20,4 mm
Series TRC.70 ESD
Inner height Bi 1: 28 mm
Inner height Bi 2: 24 mm
Bending radius R: 110 mm
Pitch: 25,6 mm
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!