iglidur® X: The endurance runner
More dimensions
When it's hot, iglidur® X is the right solution. This is true both literally and figuratively, for instance with extreme chemicals. The interesting thing is the abrasion resistance actually increases at high temperatures.
For operating temperatures from -100°C to + 250°C in continuous operation
Very good chemical resistance
High compressive strength
Lowest humidity absorption
Extremely wear resistant for the entire temperature range
|
Part No.: |
|
| Shaft diameter d1 [mm]: | |
Bearing, cylindrical [mm]
| Ordering number | d1 | d1-Tolerance | d2 | b1 | ||
|---|---|---|---|---|---|---|
| XSM-0610-08 | 6 | D12 | 10 | 8 | Upon request |  |
| XSM-0610-20 | 6 | F10 | 10 | 20 | Upon request | |
| XSM-0709-06.35 | 7 | F10 | 9 | 6.35 | Upon request | |
| XSM-1012-035 (1) | 10 | F10 | 12 | 3.5 | Upon request | |
| XSM-2832-69 (1) | 28 | F10 | 32 | 69 | Upon request | |
| XSM-2834-20 | 28 | F12 | 34 | 20 | Upon request | |
| XSM-3236-54 (1) | 32 | F10 | 36 | 54 | Upon request | |
| More about selected part: | ||||||
3D-CAD
Sample request
Quote request
Price list
myCatalog
|
||||||
iglidur® X, more dimensions, type F
|
Part No.: |
|
| Shaft diameter d1 [mm]: | |
bearing with flange [mm]
| Ordering number | d1 | d1-Tolerance | d2 | d3 | b1 | b2 | ||
|---|---|---|---|---|---|---|---|---|
| XFM-0304055-05 | 3 | F10 | 4.5 | 5.5 | 5 | 0.75 | Upon request | |
| XFM-081117-05 | 8 | E10 | 11 | 17 | 5 | 1 | Upon request | |
| XFM-121425-075 | 12 | F10 | 14 | 25 | 7.5 | 1 | Upon request | |
| XFM-2023-065 (1) | 20 | F10 | 23 | 30 | 6.5 | 1.5 | Upon request | |
| XFM-2834-44 | 28 | E10 | 34 | 60 | 44 | 1.5 | Upon request | |
| More about selected part: | ||||||||
|
3D-CAD
Sample request
Quote request
Price list
myCatalog
|
||||||||
iglidur® X, more dimensions, type F
|
Part No.: |
|
| Shaft diameter d1 [mm]: | |
Bearings with thrust washers [mm]
| Ordering number | d1 | d2 | b1 | ||
|---|---|---|---|---|---|
| XTM-0820-015 OD5 | 8 +0,25 | 20 -0,25 | 1,5 -0,05 | Upon request | |
| XTM-0829-015 | 8 +0,25 | 29 -0,25 | 1,5 -0,05 | Upon request | |
| XTM-0836-015 OD5 | 8 +0,25 | 36 -0,25 | 1,5 -0,05 | Upon request | |
| XTM-1522-008 | 15 + 0,25 | 22 - 0,25 | 0,8 - 0,05 | Upon request | |
| More about selected part: | |||||
|
3D-CAD
Sample request
Quote request
Price list
myCatalog
|
|||||
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!