By using our webpages, you agree to our use of cookies. OK

iglidur® polymer plain bearings with UL94 V0 rating

Does not burn… UL V0

The new material achieves the UL94 V0 rating and is therefore ideally suited for applications with stringent fire protection regulations (vehicle interiors, building interior systems, etc.). Other properties are similar to our allrounder iglidur® G. Other properties are similar to our allrounder iglidur® G.

Lubricant- and maintenance-free

UL94 V0 rating

high wear-resistance

Universal applicability

Application areas: Interiors of aircrafts, vehicles, railroad compartments, buildings (elevators, escalators, etc.)

General features
Density	1,53 g/cm3
Colour	black
Max. moisture absorption at 23 °C and 50 %r.h.	0.7 Wt.-%
Max. water absorption	4,0 Wt.-%

Mechanical properties
Max. permissible static surface pressure (+20 °C)	75 MPa
Shore D hardness	80

Physical and thermal properties
Upper long-term application temperature	130 °C
Upper short-term application temperature	210 °C
Lower application temperature	-40 °C

Electrical properties
Surface resistance	>10¹¹ Ω

Chamfer depending on d1

d1 [mm]	f [mm]
Ø 1-6	0,3
Ø 1-6	0,5
Ø 1-6	0,8
Ø > 30	1,2

Dimensions according to ISO 3547-1 and special dimensions

iglidur® G V0, type S


Part No.:
Shaft diameter d1 [mm]:

Bearing, cylindrical [mm]

Ordering number	d1	d1-tolerance*		d2	b1
		Min.	Max.
GV0SM-0608-06	6	+0,02	+0,068	8	6	Upon request
GV0SM-0810-10	8	+0,025	+0,083	10	10	Upon request
GV0SM-1012-08	10	+0,025	+0,083	12	8	Upon request
GV0SM-1012-09	10	+0,025	+0,083	12	9	Upon request
GV0SM-1012-10	10	+0,025	+0,083	12	10	Upon request
GV0SM-1012-15	10	+0,025	+0,083	12	15	Upon request
GV0SM-1012-17	10	+0,025	+0,083	12	17	Upon request
GV0SM-1214-12	12	+0,032	+0,102	14	12	Upon request
GV0SM-1618-15	16	+0,032	+0,102	18	15	Upon request
GV0SM-2023-20	20	+0,040	+0,124	23	20	Upon request
GV0SM-2528-20	25	+0,040	+0,124	28	20	Upon request
GV0SM-3034-30	30	+0,040	+0,124	34	30	Upon request
GV0SM-3539-40	35	+0,050	+0,150	39	40	Upon request
GV0SM-4044-40	40	+0,050	+0,150	44	40	Upon request
More about selected part:
3D-CAD Sample request Experts Quote request Price list myCatalog

* After pressfi t of the bearing in a housing with nominal dimension, the inner diameter of the bearings adjusts itself to an F10 tolerance.

iglidur® G V0, type F


Part No.:
Shaft diameter d1 [mm]:

bearing with flange [mm]

Ordering number	d1	d1-tolerance*		d2	d3	b1	b2
		Min.	Max.
GV0FM-0608-06	6	+0,02	+0,068	8	12	6	1	Upon request
GV0FM-0810-10	8	+0,025	+0,083	10	15	10	1	Upon request
GV0FM-1012-10	10	+0,025	+0,083	12	18	10	1	Upon request
GV0FM-111320-20	11	+0,032	+0,102	13	20	20	0.5	Upon request
GV0FM-1214-12	12	+0,032	+0,102	14	20	12	1	Upon request
GV0FM-1618-17	16	+0,032	+0,102	18	24	17	1	Upon request
GV0FM-2023-21	20	+0,040	+0,124	23	30	21.5	1.5	Upon request
GV0FM-2528-21	25	+0,040	+0,124	28	35	21	1.5	Upon request
GV0FM-3034-37	30	+0,040	+0,124	34	42	37	2	Upon request
GV0FM-3539-36	35	+0,050	+0,150	39	47	36	2	Upon request
GV0FM-4044-40	40	+0,050	+0,150	44	52	40	2	Upon request
More about selected part:
3D-CAD Sample request Experts PDF Quote request Price list myCatalog

* After pressfi t of the bearing in a housing with nominal dimension, the inner diameter of the bearings adjusts itself to an F10 tolerance.

More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!

No minimum order value Delivery from 24h* 7⁰⁰ - 20⁰⁰ Delivery+Consultation Free samples Is something not to your liking? / Feedback