drylin® E NEMA 17
The small one with lots of power
This little motor can be impressive with good torque and high speeds. Reliable, rapid movements of smaller loads.
Overview of drylin® E products - "E“ as in electric
drylin® E - Product finder and lifetime calculation
Show full size
After selecting your application parameters the product finder shows an overview of the linear tables and motors that are suitable. The product finder calculates the individual price of the linear axis as well as the motor loads and the life expectancy in cycles. With only a few clicks, you can configure a complete linear axis including motor, supply cable and mounting components.
Show full size
Delivery program:
The small one with lots of power
drylin® E NEMA 23
The most popular stepper motor size
High torque and high speed are the main advantages. This motor is the best choice for most applications in the medium load range.
drylin® E NEMA 23XL
The power motor, medium size
An advanced development of the typical NEMA23 with approximately double the torque. The mounting dimensions are the same as in the NEMA23, so that it can be used on the same mounting face.
drylin® E NEMA 34
Large size, power package
Applications with high loads should use this large type. Heavy duty or parallel twin rail superstructures are typical working environment.
drylin® E - spindle motors
These are used in stand-alone solutions for customer designs in confined installation spaces.
drylin® E - DC motors
Simple linear motions can be implemented by DC motors. The motor can be rotated with a battery or a simple power supply unit.
drylin® E - NEMA23 IP65 & IP68
IP65 (spray water) and IP86 (submerged) stepper motors are ideally suited for applications in wet environments.
drylin® E - gearbox for stepper motors
Implement heavy-duty format adjustments or stroke movements even with smaller motors.
drylin® E accessories
Spacer, motor flange and coupling due to the right linear tabel and motor combinations.
drylin® E - End- and reference switch
End- and reference switch suitable to drylin® linear axis
GRW-0630 - highly dynamic at small loads
Small and light cantilever axis for "pick & place" applications
A = igus® step motors
Cost-effective
Maintenance-free solution
Four installation sizes
15 variants
B = Claw coupling
C = Motor flange: connection for stepper motors
D = Ball bearings leadscrew supports
E = Tooth belt, trapezoidal or high helix thread
F = Liners made of maintenance-free iglidur® J
G = Lubrication-free linear guide system using polymer bearings
| motor size | motor datas | possible/recommended axis
belt driven | spindle |
| NEMA17 | Holding torque Mo[Nm]=0,5
flange dimension 42mm | ZLW-0630
ZLW-1040 | SAW-0630
SAW-1040 SHT-12 SLW-1040 SLW-1080 |
| NEMA23 | Holding torque Mo[Nm]=2,0
flange dimension 56mm | ZLW-0630
ZLW-1040 ZAW-1040 | SAW-1040
SHT-12 SLW-1040 SLW-1080 SHT-20 SLW-1660* SLW-2080* |
| NEMA23XL | Holding torque Mo[Nm]=3,5
flange dimension 60mm | ZLW-0630
ZLW-1040 ZAW-1040 | SAW-1040
SHT-12 SLW-1040 SLW-1080 SHT-20 SLW-1660* SLW-2080* |
| NEMA34 | Holding torque Mo[Nm]=5,9
flange dimension 86mm | ZLW-1660 | SHT-20
SLW-1660* SLW-2080* |
* = on request
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!