The range of the flip-open and chip-tight igus® E-Tube R4.80 was further expanded. Due to the stable double stop dogs, the tongue and groove system and large wear pads, the R4.80 tube is ideal for demanding tasks.
Two-side snap open: The bottoms can be taken at any point in the inner radius; the lid can in addition be folded out in the outer radius.
Good protection of cables against dirt and chips of all kinds
Protection against hot chips up to 850°C (Optional: HT material)
| Series | Inner height | Inner width | Outer height | Outer width | Bending radius from-to | ||
|---|---|---|---|---|---|---|---|
| hi [mm] | Bi [mm] | ha [mm] | Ba [mm] | R [mm] | |||
 R4.80.10.200.0 |
100 | 80 | 150 | 108 | 200 | Upon request |  |
| R4.80.10.250.0 |
100 | 80 | 150 | 108 | 250 | Upon request | |
| R4.80.10.300.0 |
100 | 80 | 150 | 108 | 300 | Upon request | |
| R4.80.10.350.0 |
100 | 80 | 150 | 108 | 350 | Upon request | |
| R4.80.10.400.0 |
100 | 80 | 150 | 108 | 400 | Upon request | |
| R4.80.10.500.0 |
100 | 80 | 150 | 108 | 500 | Upon request | |
| R4.80.10.550.0 |
100 | 80 | 150 | 108 | 550 | Upon request | |
| R4.80.10.600.0 |
100 | 80 | 150 | 108 | 600 | Upon request | |
| R4.80.10.1000.0 |
100 | 80 | 150 | 108 | 1000 | Upon request | |
 R4.80.15.200.0 |
150 | 80 | 200 | 108 | 200 | Upon request | |
| R4.80.15.250.0 |
150 | 80 | 200 | 108 | 250 | Upon request | |
| R4.80.15.300.0 |
150 | 80 | 200 | 108 | 300 | Upon request | |
| R4.80.15.350.0 |
150 | 80 | 200 | 108 | 350 | Upon request | |
| R4.80.15.400.0 |
150 | 80 | 200 | 108 | 400 | Upon request | |
| R4.80.15.500.0 |
150 | 80 | 200 | 108 | 500 | Upon request | |
| R4.80.15.550.0 |
150 | 80 | 200 | 108 | 550 | Upon request | |
| R4.80.15.600.0 |
150 | 80 | 200 | 108 | 600 | Upon request | |
| R4.80.15.1000.0 |
150 | 80 | 200 | 108 | 1000 | Upon request | |
| R4.80.20.200.0 |
200 | 80 | 250 | 108 | 200 | Upon request | |
| R4.80.20.250.0 |
200 | 80 | 250 | 108 | 250 | Upon request | |
| R4.80.20.300.0 |
200 | 80 | 250 | 108 | 300 | Upon request | |
| R4.80.20.350.0 |
200 | 80 | 250 | 108 | 350 | Upon request | |
| R4.80.20.400.0 |
200 | 80 | 250 | 108 | 400 | Upon request | |
| R4.80.20.500.0 |
200 | 80 | 250 | 108 | 500 | Upon request | |
| R4.80.20.550.0 |
200 | 80 | 250 | 108 | 550 | Upon request | |
| R4.80.20.600.0 |
200 | 80 | 250 | 108 | 600 | Upon request | |
| R4.80.20.1000.0 |
200 | 80 | 250 | 108 | 1000 | Upon request | |
| R4.80.25.200.0 |
250 | 80 | 300 | 108 | 200 | Upon request | |
| R4.80.25.250.0 |
250 | 80 | 300 | 108 | 250 | Upon request | |
| R4.80.25.300.0 |
250 | 80 | 300 | 108 | 300 | Upon request | |
| R4.80.25.350.0 |
250 | 80 | 300 | 108 | 350 | Upon request | |
| R4.80.25.400.0 |
250 | 80 | 300 | 108 | 400 | Upon request | |
| R4.80.25.500.0 |
250 | 80 | 300 | 108 | 500 | Upon request | |
| R4.80.25.550.0 |
250 | 80 | 300 | 108 | 550 | Upon request | |
| R4.80.25.600.0 |
250 | 80 | 300 | 108 | 600 | Upon request | |
| R4.80.25.1000.0 |
250 | 80 | 300 | 108 | 1000 | Upon request | |
| R4.80.30.200.0 |
300 | 80 | 350 | 108 | 200 | Upon request | |
| R4.80.30.250.0 |
300 | 80 | 350 | 108 | 250 | Upon request | |
| R4.80.30.350.0 |
300 | 80 | 350 | 108 | 350 | Upon request | |
| R4.80.30.400.0 |
300 | 80 | 350 | 108 | 400 | Upon request | |
| R4.80.30.500.0 |
300 | 80 | 350 | 108 | 500 | Upon request | |
| R4.80.30.550.0 |
300 | 80 | 350 | 108 | 550 | Upon request | |
| R4.80.30.600.0 |
300 | 80 | 350 | 108 | 600 | Upon request | |
| R4.80.30.1000.0 |
300 | 80 | 350 | 108 | 1000 | Upon request | |
| R4.80.35.200.0 |
350 | 80 | 400 | 108 | 200 | Upon request | |
| R4.80.35.250.0 |
350 | 80 | 400 | 108 | 250 | Upon request | |
| R4.80.30.300.0 |
300 | 80 | 350 | 108 | 300 | Upon request | |
| R4.80.35.300.0 |
350 | 80 | 400 | 108 | 300 | Upon request | |
| R4.80.35.350.0 |
350 | 80 | 400 | 108 | 350 | Upon request | |
| R4.80.35.400.0 |
350 | 80 | 400 | 108 | 400 | Upon request | |
| R4.80.35.500.0 |
350 | 80 | 400 | 108 | 500 | Upon request | |
| R4.80.35.550.0 |
350 | 80 | 400 | 108 | 550 | Upon request | |
| R4.80.35.600.0 |
350 | 80 | 400 | 108 | 600 | Upon request | |
| R4.80.35.1000.0 |
350 | 80 | 400 | 108 | 1000 | Upon request | |
| R4.80.40.200.0 |
400 | 80 | 450 | 108 | 200 | Upon request | |
| R4.80.40.250.0 |
400 | 80 | 450 | 108 | 250 | Upon request | |
| R4.80.40.300.0 |
400 | 80 | 450 | 108 | 300 | Upon request | |
| R4.80.40.350.0 |
400 | 80 | 450 | 108 | 350 | Upon request | |
| R4.80.40.400.0 |
400 | 80 | 450 | 108 | 400 | Upon request | |
| R4.80.40.500.0 |
400 | 80 | 450 | 108 | 500 | Upon request | |
| R4.80.40.550.0 |
400 | 80 | 450 | 108 | 550 | Upon request | |
| R4.80.40.600.0 |
400 | 80 | 450 | 108 | 600 | Upon request | |
| R4.80.40.1000.0 |
400 | 80 | 450 | 108 | 1000 | Upon request | |
| R4.80.46.200.0 |
462 | 80 | 513 | 108 | 200 | Upon request | |
| R4.80.46.250.0 |
462 | 80 | 513 | 108 | 250 | Upon request | |
| R4.80.46.300.0 |
462 | 80 | 513 | 108 | 300 | Upon request | |
| R4.80.46.350.0 |
462 | 80 | 513 | 108 | 350 | Upon request | |
| R4.80.46.400.0 |
462 | 80 | 513 | 108 | 400 | Upon request | |
| R4.80.46.500.0 |
462 | 80 | 513 | 108 | 500 | Upon request | |
| R4.80.46.550.0 |
462 | 80 | 513 | 108 | 550 | Upon request | |
| R4.80.46.600.0 |
462 | 80 | 513 | 108 | 600 | Upon request | |
| R4.80.46.1000.0 |
462 | 80 | 513 | 108 | 1000 | Upon request | |
| More about selected part: | |||||||
3D-CAD
Sample request
PDF
Quote request
Price list
myCatalog
|
|||||||
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!