By using our webpages, you agree to our use of cookies. OK

RX e-tubes - Novel and extremely chip-proof

The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open.

Snap-open in the outer radius

A smooth, curved outer contour prevents chips from sticking

Injection-molded "sealing lips" all around

No holes, cracks, undercuts

Series RX40 is IP40 tested (TÜV Saarland)

Interior separation and guide trough available

Covered pin/hole connection and stops

"RBR" version with bending radius on both sides available

Typical branches of industry

Machine tools

All applications in the direct chip sector

Applications exposed to dust and dirt

General mechanical engineering

Dimensions and technical datas RX e-tubes

Conclusive test results on underwater impermeability and on the penetration of chips

Chip tests in the igus® laboratory demonstrate the tremendous chip-proof properties of the igus® RX tube.

Chip-proof - for all types of chips and applications

E-Chain® selection aids

You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table.

Productfinder

Assembly instruction

Dismantling / assembling a cover, replacing a chain link and assembling / inserting the RX tube.

Assembly instruction

Configure interior separation

Define cables, select chain and configure interior separation. Now also for RX tubes!

Interior separation
configurator

Application examples

Applications in various industrial sectors.

RX tubes

Product range RX E-Tubes

RX32

Inner height hi: 42 mm
Inner widths Bi: 80mm
Bending radii R: 80 - 250 mm
Pitch: 32 mm

RX E-Tube

RX40

Inner height hi: 52 mm
Inner widths Bi: 100 mm
bending radii R: 100 - 300 mm
Pitch: 40 mm

RX E-Tube

RX48

Inner height hi: 62 mm
Inner widths Bi: 120mm
Bending radii R: 120 - 325 mm
Pitch: 48 mm

RX E-Tube

RX56

Inner height hi: 73 mm
Inner widths Bi: 140mm
Bending radii R: 140 - 350 mm
Pitch: 56 mm

RX E-Tube

Product range RX e-tubes High temperature

RX56

High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h

RX - from stock against hot chips

Series RX - new chip-proof design, small pitch, removable cover

Chip-proof design without undercuts and edges

Excentric locking

Material igumid G

rounded shape

covered pin/hole connection

RX tubes IP tested

Technical report TÜV NORD

red dot 2011: honourable mention
for RX40

iF-Design-Award for
RX e-tubes

ESD classification: Electrically conductive ESD/Atex versions on request

UL94-V0 classification on request

e-tubes available as special design with HT material for 850°C hot chips

Submersion test in water - Various tube types were submerged under water. The new RX tube needs over 30 seconds until it is filled up, thus proving its high leak tightness
Y = time in seconds

A = igus® products
B = competitor

Chip penetration test - Various types of tube were exposed to a defined quantity of chips. In the new RX tube, after 80,000 cycles only 0.2 g of chips were found in the interior
Y = chip mass [g]

A = igus® RX e-tube RX40.100.100
251.900 cycles
B = igus® e-tubes 68.10.100.0
256.132 cycles
C = test tube 01
250.907 cycles
D = test tube 02*
2.600 cycles
*Teststop after 2.600 cycles

E = igus® products
F = competitor

More than 100,000 products available! Delivery and Customer Service Mon-Fri from 8am-8pm and Sat from 8am-12pm!

No minimum order value Delivery from 24h* 8⁰⁰ - 8⁰⁰ Delivery+Consultation Free samples Is something not to your liking? / Feedback