Chip resistant E-Tube - openable both sides
1. Lids snap open on inner and outer radius
2. Chip-tight due to special “labyrinth“- seal on the lids
3. Optionally polymer-lids or heat-resistant aluminum-lids
4. Excess wear material for long cycle life in gliding applications
5. Proven overlapping side links for high torsion stability
6. Cablefriendly due to wear-optimized guidance with polymer crossbars
Another world premiere against chips. Another world premiere against chips. Lids with special seals are clipped on to an E-Chain®. All existing elements are still useable - only chip-tight!
Just clip on lids - works also with Series E4.42
Lids easily snap on to the plastic cross bars
Lids mate, sealing the interior against chips
Tight interlocking of lids due to the stepped „labyrinth“-seal. Chips are simply scraped off by the lid contour and do not get in contact with the interior
Tight fi t against the side link. A special gap-free contour tightens against chips.
Cables are guided safely by wear-optimized plastic cross bars
Test 2: Chip intrusion
After 80.000 cycles only 0,2g chips were found in the new RA-tube interior
Delivery program:
| Part No. | Inner height
Hi [mm] |
Inner width
Bi [mm] |
Outer height
ha [mm] |
Outer width
Ba [mm] |
Bending radius
R [mm] |
lid / bottom
|
||
|---|---|---|---|---|---|---|---|---|
| RP3838.Bi.R.0 | 42 | 50 - 400 | 65,5 | 77 - 427 | 125 - 350 | Plastic |  Inquiry |
|
| RA3838.Bi.R.0 | 42 | 50 - 400 | 65,5 | 77 - 427 | 125 - 350 | Aluminum | Inquiry |
|
| A785.Bi / A786.Bi | Single part lid / bottom aluminum | |||||||
| P785.Bi / P786.Bi | Single part lid / bottom plastics | |||||||
available from May 2009
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!