iglidur® round bar - new material J4
iglidur® round bars with diameter 30 mm:
After round bars made from iglidur® J, W300, A180 and R, now round bars made from iglidur® J4 and P210 are available ex stock - or order custom design part.
cost effective
Wear resistant
good moisture absorption
-50 °C to +90°C long time application temperature
Resistant to media
Delivered off the shelf
A custom-made bearing made of iglidur® J round bars in a tire production plant
| Material data iglidur® J4 | ||
|---|---|---|
| Density | 1,48 g/cm3 | |
| Paint | grey | |
| Shore D hardness | 74 | |
| Max. moisture absorption
at 23°C / 74°F and 50% r.h.: | 0,3 weight-% | |
| Max. water absorption | 1,3 weight-% | |
| Upper long-term
application temperature | 90°C | |
| Upper short-term
application temperature | 120°C | |
| Upper short-term
application temperature* | 140°C | |
| Lower application temperature | -50°C | |
| Bending E-module | 2.350 MPa | |
| tensile strength | 70 MPa | |
| Max. surface pressure | 35 MPa | |
| Specific forward resistance | >1013Ωcm | |
| Surface resistance | >1012Ω | |
| *without additional load, no sliding movement;
relaxation possible |
||
| Part No. | Material | Size Ø [mm] | ||
|---|---|---|---|---|
| SFRJ4-3000 | iglidur® J4 | 30 |  Inquiry |
|
| SFRP210-3000 | iglidur® P210 | 30 | Inquiry |
|
| SFRA180-3000 | iglidur® A180 | 30 | Inquiry |
|
| SFRJ-3000 | iglidur® J | 30 | Anfragen |
|
| SFRR-3000 | iglidur® R | 30 | Inquiry |
|
| SFRW-3000 | iglidur® W300 | 30 | Inquiry |
New: iglidur® round bars now available with 40 mm diameter (60 and 80 mm in preparation)
More information:
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!