iglidur® J4 is the new low-cost material for long lifetimes for low to medium loads.
Maintenance- and lubricant-free
Low-cost-material for large volumes
Low coefficients of friction
Resistant to media
Low humidity absorption
iglidur® J4 - low cost and low wear
New as standard range:
Bearings made of iglidur® J4 in a satellite receiving unit
)
| Material data iglidur® J4 | ||
|---|---|---|
| Density | 1,48 g/cm3 | |
| Paint | grey | |
| Max. moisture absorption at 23°C / 74°F and 50% r.h.: | 0,3 weight-% | |
| Max. water absorption | 1,3 weight-% | |
| Upper long-term application temperature | 90°C | |
| Upper short-term {HA}application temperature | 120°C | |
| Lower application temperature | -50°C | |
| Bending E-module | 2.350 MPa | |
| Max. surface pressure | 35 MPa | |
| Surface resistance | >1012Ω | |
25 dimensions - ex stock
iglidur® J4, Form S (metric)
| Part No. | d1 | tolerance
|
d2 | b1 | |||
|---|---|---|---|---|---|---|---|
| After pressfit in H7 | |||||||
| [mm] | Min. | Max. | [mm] | [mm] | |||
 J4SM-0810-08 (1) |
8 | +0,025 | +0,083 | 10 | 8 | Upon request |  |
| J4SM-1012-11 (1) |
10 | +0,025 | +0,083 | 12 | 11 | Upon request | |
| J4SM-1012-15 (1) |
10 | +0,025 | +0,083 | 12 | 15 | Upon request | |
| J4SM-1418-18 (1) |
14 | +0,032 | +0,102 | 18 | 18 | Upon request | |
| J4SM-1622-16 (1) |
16 | +0,050 | +0,160 | 22 | 16 | Upon request | |
| J4SM-2022-30 (1) |
20 | +0,040 | +0,124 | 22 | 30 | Upon request | |
| J4SM-2023-15 (1) |
20 | +0,040 | +0,124 | 23 | 15 | Upon request | |
 J4SM-0405-04 (1) |
4 | +0,020 | +0,068 | 5.5 | 4 | Upon request | |
| J4SM-0507-05 (1) |
5 | +0,020 | +0,068 | 7 | 5 | Upon request | |
| J4SM-0608-06 (1) |
6 | +0,020 | +0,068 | 8 | 6 | Upon request | |
| J4SM-0810-06 (1) |
8 | +0,025 | +0,083 | 10 | 6 | Upon request | |
| J4SM-0810-10 (1) |
8 | +0,025 | +0,083 | 10 | 10 | Upon request | |
| J4SM-1012-10 (1) |
10 | +0,025 | +0,083 | 12 | 10 | Upon request | |
| J4SM-1012-12 (1) |
10 | +0,025 | +0,083 | 12 | 12 | Upon request | |
| J4SM-1214-10 (1) |
12 | +0,032 | +0,102 | 14 | 10 | Upon request | |
| J4SM-1416-15 (1) |
14 | +0,032 | +0,102 | 16 | 15 | Upon request | |
| J4SM-1517-20 (1) |
15 | +0,032 | +0,102 | 17 | 20 | Upon request | |
| J4SM-1618-15 (1) |
16 | +0,032 | +0,102 | 18 | 15 | Upon request | |
| J4SM-1622-20 (1) |
16 | +0,050 | +0,160 | 22 | 20 | Upon request | |
| J4SM-1820-15 (1) |
18 | +0,032 | +0,102 | 20 | 15 | Upon request | |
| J4SM-2023-20 (1) |
20 | +0,040 | +0,124 | 23 | 20 | Upon request | |
| J4SM-2528-20 (1) |
25 | +0,040 | +0,124 | 28 | 20 | Upon request | |
| J4SM-3034-30 (1) |
30 | +0,040 | +0,124 | 34 | 30 | Upon request | |
| More about selected part: | |||||||
3D-CAD
Sample request
Experts
Quote request
Price list
myCatalog
|
|||||||
iglidur® J4, Form F (metric)
| Part No. | d1 | tolerance
|
d2 | d3 | b1 | b2 | |||
|---|---|---|---|---|---|---|---|---|---|
| After pressfit in H7 | |||||||||
| [mm] | Min. | Max. | [mm] | [mm] | [mm] | [mm] | |||
| J4FM-0304-05 (1) |
3 | +0,014 | +0,054 | 4.5 | 7.5 | 5 | 0.75 | Upon request | |
| J4FM-0810-05 (1) |
8 | +0,025 | +0,083 | 10 | 15 | 5 | 1 | Upon request | |
| J4FM-0810125-10 (1) |
8 | +0,025 | +0,083 | 10 | 12.5 | 10 | 1 | Upon request | |
| J4FM-1012-10 (1) |
10 | +0,025 | +0,083 | 12 | 18 | 10 | 1 | Upon request | |
| J4FM-101215-035 (1) |
10 | +0,025 | +0,083 | 12 | 21.5 | 3.5 | 1 | Upon request | |
| J4FM-1214-09 (1) |
12 | +0,032 | +0,102 | 14 | 14 | 9 | 1 | Upon request | |
| J4FM-1214-15 (1) |
12 | +0,032 | +0,102 | 14 | 20 | 15 | 1 | Upon request | |
| J4FM-2023-11 (1) |
20 | +0,040 | +0,124 | 23 | 30 | 11.5 | 1.5 | Upon request | |
| J4FM-2026-15 (1) |
20 | +0,65 | +0,195 | 26 | 26 | 15 | 3 | Upon request | |
| J4FM-2026-20 (1) |
20 | +0,65 | +0,195 | 26 | 26 | 20 | 3 | Upon request | |
| J4FM-2430-30 (1) |
24 | +0,040 | +0,124 | 30 | 36 | 30 | 3 | Upon request | |
| J4FM-2526-25 (1) |
25 | - | - | 26 | 26 | 25 | 3 | Upon request | |
| J4FM-2532-25 (1) |
25 | +0,065 | +0,195 | 32 | 38 | 25 | 4 | Upon request | |
| J4FM-0507-05 (1) |
5 | +0,020 | +0,068 | 7 | 11 | 5 | 1 | Upon request | |
| J4FM-0608-06 (1) |
6 | +0,020 | +0,068 | 8 | 12 | 6 | 1 | Upon request | |
| J4FM-0810-10 (1) |
8 | +0,025 | +0,083 | 10 | 15 | 10 | 1 | Upon request | |
| J4FM-1012-05 (1) |
10 | +0,025 | +0,083 | 12 | 18 | 5 | 1 | Upon request | |
| J4FM-1012-12 (1) |
10 | +0,025 | +0,083 | 12 | 18 | 12 | 1 | Upon request | |
| J4FM-1214-07 (1) |
12 | +0,032 | +0,102 | 14 | 20 | 7 | 1 | Upon request | |
| J4FM-1214-12 (1) |
12 | +0,032 | +0,102 | 14 | 22 | 12 | 1 | Upon request | |
| J4FM-1416-17 (1) |
14 | +0,032 | +0,102 | 16 | 22 | 17 | 1 | Upon request | |
| J4FM-1517-17 (1) |
15 | +0,032 | +0,102 | 17 | 23 | 17 | 1 | Upon request | |
| J4FM-1618-17 (1) |
16 | +0,032 | +0,102 | 18 | 24 | 17 | 1 | Upon request | |
| J4FM-1820-12 (1) |
18 | +0,032 | +0,102 | 20 | 26 | 12 | 1 | Upon request | |
| J4FM-2023-21 (1) |
20 | +0,040 | +0,124 | 23 | 30 | 21.5 | 1.5 | Upon request | |
| J4FM-2026-25 (1) |
20 | +0,065 | +0,195 | 26 | 32 | 25 | 3 | Upon request | |
| J4FM-2528-21 (1) |
25 | +0,040 | +0,124 | 28 | 35 | 21.5 | 1.5 | Upon request | |
| More about selected part: | |||||||||
|
3D-CAD
Sample request
Experts
Quote request
Price list
myCatalog
|
|||||||||
More information:
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!