By using our webpages, you agree to our use of cookies. OK

iglidur® J260 - good wear resistance

Good on plastic

New standard iglidur® material: iglidur® J260

Until now, iglidur® J260 was used as a “secret weapon” in our DryLin® R Linear Bearings.

Maintenance- and lubricant-free

Very good c.o.f. for low or medium loads

Resistant to media

Slightly higher temperatures than with iglidur® J

Longer life time - even on polymer shafts

iglidur® J260 is the ideal bearing for polymer shafts, e.g. in conveyor systems

	Material data iglidur® J260
	Density	1,35 g/cm³
	Paint	yellow
	Max. moisture absorption at 23°C / 74°F and 50% r.h.:	0,2 weight-%
	Max. water absorption	0,4 weight-%
	Upper long-term application temperature	120°C
	Upper short-term {HA}application temperature	140°C
	Lower application temperature	-100°C
	Bending E-module	2.200 MPa
	Max. surface pressure	40 MPa
	Surface resistance	>10¹⁰Ω

14 dimensions - ex stock

iglidur® J260, Form S (metric)

Part No.	d1	tolerance		d2	b1
		After pressfit in H7
	[mm]	Min.	Max.	[mm]	[mm]
J260SM-0608-06⁽¹⁾	6	+0,020	+0,068	8	6	Upon request
J260SM-0810-06⁽¹⁾	8	+0,025	+0,083	10	6	Upon request
J260SM-0810-10⁽¹⁾	8	+0,025	+0,083	10	10	Upon request
J260SM-1012-10⁽¹⁾	10	+0,025	+0,083	12	10	Upon request
J260SM-1214-12⁽¹⁾	12	+0,032	+0,102	14	12	Upon request
J260SM-1214-15⁽¹⁾	12	+0,032	+0,102	14	15	Upon request
J260SM-1618-15 ⁽¹⁾	16	+0,032	+0,102	18	15	Upon request
J260SM-1618-135	16	+0,032	+0,102	18	13.5	Upon request
J260SM-1820-12⁽¹⁾	18	+0,032	+0,102	20	12	Upon request
J260SM-1820-20	18	+0,032	+0,102	20	20	Upon request
J260SM-2023-20 ⁽¹⁾	20	+0,040	+0,124	23	20	Upon request
More about selected part:
3D-CAD Sample request Experts PDF Quote request Price list myCatalog

(1) The specified d1 tolerance adjusts itself after the force fitting. Test method

iglidur® J260, Form F (metric)

Part No.	d1	tolerance		d2	d3	b1	b2
		After pressfit in H7
	[mm]	Min.	Max.	[mm]	[mm]	[mm]	[mm]
J260FM-0608-06⁽¹⁾	6	+0,020	+0,068	8	12	6	1	Upon request
J260FM-0810-10 ⁽¹⁾	8	+0,025	+0,083	10	15	10	1	Upon request
J260FM-1012-10⁽¹⁾	10	+0,025	+0,083	12	18	10	1	Upon request
J260FM-1214-12 ⁽¹⁾	12	+0,032	+0,102	14	20	12	1	Upon request
J260FM-1618-17⁽¹⁾	16	+0,032	+0,102	18	24	17	1	Upon request
J260FM-2023-21⁽¹⁾	20	+0,040	+0,124	23	30	21.5	1.5	Upon request
More about selected part:
3D-CAD Sample request Experts PDF Quote request Price list myCatalog

(1) The specified d1 tolerance adjusts itself after the force fitting. Test method

More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!