igubal® - Spherical axial bearing
Mechanical properties
The self-aligning spherical igubal ® thrust bearings are very easy-to-mount units, which help to compensate for errors and prevent misalignments.
The thrust bearing housing pad is made of the impact-resistant, stiff, thermoplastic composite material igumid G. The standard thrust bearing washer is made of iglidur® W300. This combination provides particularly good gliding and wear properties in relative movements.
Loads
The load carrying capacity of the spherical igubal® thrust bearing is very high in normal ambient temperature. In particular cases the load carrying capacity of the axial bearings should be checked in a practical trial with high constant loads and at higher temperatures.
Coefficients of surface friction and speeds
Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained.
Installation
The axial bearing pad is mounted flush and secured. The spherical washer glides loosely in the pad and is held by the shouldered shaft mounted on it.
Delivery program
As standard, the spherical igubal® axial bearings are supplied in sizes of 5 to 20 mm. For other dimensions, please contact us.
Special features
- Simple assembly
- Compensation of misalignments
- Compensation of edge loads
- Very good gliding and wear properties, low installation space
When to use it?
When you want to save weight
When freedom from corrosion is required
When a bearing with good friction coefficients is sought
When not to use?
When very heavy loads act
When constant temperatures of more than +80℃ occur
When high rotary speeds must be implemented.
|
Part No.: |
|
| d1 [mm]: | |
Dimensions [mm]
| Order no. | d1
spherical washer |
d3
housing pad |
d2 | h1
spherical washer |
h2
housing pad |
H*
Total height |
R1
radius |
Balance
angle |
Total
weight |
||
|---|---|---|---|---|---|---|---|---|---|---|---|
| DIN 7168 | DIN 7168 | [mm] | [mm] | [mm] | [mm] | [mm] | [g] | ||||
 SAM-05 |
5.2 | 7,0 | 15 | 3 | 3.5 | 4.7 | 15 | 3° | 0.9 | Upon request |  |
| SAM-06 |
6.2 | 7,5 | 16 | 3 | 4 | 5.3 | 16 | 3° | 1.1 | Upon request | |
| SAM-08 |
8.2 | 10,0 | 20 | 4 | 5 | 6.8 | 20 | 2° | 2.2 | Upon request | |
| SAM-10 |
10.2 | 12,0 | 24 | 4.5 | 5.5 | 7.5 | 24 | 2° | 3.4 | Upon request | |
| SAM-12 |
12.5 | 14,5 | 30 | 5 | 6.2 | 8 | 32 | 2° | 5.9 | Upon request | |
| SAM-16 |
16.5 | 19,0 | 36 | 5.5 | 6.5 | 8.7 | 40 | 2° | 8.5 | Upon request | |
| SAM-20 |
20.2 | 23,0 | 44 | 6 | 7 | 8.6 | 45 | 2° | 12.8 | Upon request | |
| More about selected part: | |||||||||||
3D-CAD
Sample request
Experts
PDF
Quote request
Price list
myCatalog
|
|||||||||||
Load data
| Order no. | Maximum static
axial operating pressure force, short term |
Maximum static
axial operating pressure force, long term |
|---|---|---|
| [N] | [N] | |
| SAM-05 |
4000 | 2000 |
| SAM-06 |
5000 | 2500 |
| SAM-08 |
8000 | 4000 |
| SAM-10 |
10000 | 5000 |
| SAM-12 |
12000 | 6000 |
| SAM-16 |
17000 | 8500 |
| SAM-20 |
22000 | 11000 |
| More about selected part: | ||
|
3D-CAD
Sample request
Experts
PDF
Quote request
Price list
myCatalog
|
||
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!