DryLin® T - System design, lateral, 1 rail and 2 carriages or 2 rails and 4 carriages

2nd Step:

Check whether the clearances of the aggressive forces lie within the permitted values (see Maximum permitted clearances).

Maximum permitted clearances:

Option: 1 rail, 2 carriage
Option: 2 rails, 4 carriages
sy + sz < 2 wx - Y0
ay + az < 2 wx - Y0

3rd Step:

Calculate the required driving power

Initially two calculations should be carried out:

 
 

The driving power Fa corresponds to the calculated maximum value:

 



4th Step:

Calculate the maximum bearing load

4.1

Maximum bearing load in y-direction

 
4.2

Maximum bearing load in z-direction

 

A = Point of origin
B = Fixed bearing
C = Floating bearing

 

Variables in the calculation:

Fa: Driving power [N]
Fs: Mass force [N]
Fy, Fz: Bearing load in y- or z-direction [N]
sx, sy, sz: Clearance of the mass force
in x-, y- or z-direction
[mm]
ay, az: Clearance of the driving power
in y- or z-direction
[mm]
wx: Clearance of the carriage on a rail [mm]
LX: Constant based on the installation size [mm]
Zm: Constant based on the installation size [mm]
Y0: Constant based on the installation size [mm]
b: Clearance of the guide rails [mm]
µ: Coefficient of friction,
µ = 0 in static loads,
µ = 0.2 in dynamic loads
 
ZW: Number of carriages per rail  


The constant values:

Order no. LX ZM Y0
  [mm] [mm] [mm]
TW-01-15 29 16 11,5
TW-01-20 35 23 15,0
TW-01-25 41 25 19,0
TW-01-30 49 29 21,5


Coefficients:

  1 rail,
2 carriages
2 rails,
3-4 carriages
K1 |(ay+Y0)/Wx| |(ay+Y0)/Wx|
K2 (sy+Y0)/Wx (sy+Y0)/Wx
K3 |az/Wx| |az/Wx|
K4 |sx/Wx| |sx/Wx|
K5 |sz/Wx| |sz/Wx|
K6 |(sy+Y0)/Zm| |(sy+Y0)/b|
K7 |sz/Zm| |(sz/b)-0,5|

5th Step:

Check the maximum bearing load of the most strongly stressed bearing with the calculated load in Step No. 4.

Maximum permitted load:

Order no. Fymax, Fzmax
[N]
TW-01-15 2000
TW-01-20 3700
TW-01-25 5000
TW-01-30 7000

6th Step:

Determination of the maximum permitted speed for the load in Step No. 4

Diagram for the determination of the maximum permitted speed for the determined bearing load.
X = centric bearing load [N]
Y = permitted mean velocity [m/s]

 

More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!


Contact
Other contact options

+49 (0) 2203-9649-0
Send e-mail to igus®
igus® contact
Back to the top