drylin® productfinder
Productfinder for leadscrew modules, toothed belt axes and tube adjustments.
DryLin® SHT /SLW - leadscrew modules
The drylin® product portfolio provides lubricant-free linear axles that are driven either by trapezoidal thread, steep thread or toothed belt. The user can choose a suitable individual solution from lightweight solid plastic units up to massive stainless steel solutions. In all systems, the stroke length is freely selectable and the drive implemented either via hand wheel or motor.
1
Main body made of stainless steel, aluminum, zinc or plastic
2Lubrication-free through polymer bearings and polymer nuts
33 shaft materials
4Carriages made of anodized aluminum or solid polymer
58 trapezoidal thread pitches 4 steep thread pitches
6Spindle machining according to drawings or spindle pin Steel, stainless steel or aluminum spindles
Position indicator, clamping and hand wheels available
Technical data
| Glider material: | iglidur® J |
| Shaft materials: | Alu, hard andonized
Cf53 stainless steel |
| Spindle material: | Steel
Stainless steel Aluminum, hard-anodized |
When to use it?
For format adjustments
In extreme environments
When a cost-effective, ready-to-install solution is desired
When corrosion resistance is required
When it should be low noise
When not to use it?
When high loads should move highly dynamically
When positioning accuracy < 0.1 mm is necessary
If high running performance is required in continuous operation
Quick overview
DryLin® SHT drive technology
SHT – the standard
Solid design
Three different installation sizes
Various materials for shaft and spindle
Maintenance-free and corrosion-resistant
TR 10 x 2, TR 18 x 4, TR 24 x 5
SHT-PL "Preload"
Prestressed trapezoidal nut, preload force: 50 N
Manually and continuously adjustable radial clearance
Tapered off spindle end enables operation by hand wheel or motor
SHTC Compact
High flexibility
Ideal for 2 carriages
Maintenance-free, self lubricating
Adjustable bearing clearance
SHTS High speed
Pitch 10 x 12, 10 x 50, 18 x 100
Steep-threaded spindle
High-Speed-solution
Maintenance-free, self lubricating
SHT lift table with quick release
Aluminum version
For fast format adjustments
Brake by interlocking included
Freely selectable stroke lengths
SHT ZB - Zero-backlash threaded nut in linear axis
Lubricant- and maintenance-free
High precision independent of load
Self-adjusting
Quiet
Resistant to corrosion
SHT-BB leadscrew module with ball-bearing mounted spindle
Higher RPMs, increased precision
Belt drive permits radial loads
Constant torque
Reduced axial clearance
SHT – HTX high temperature
high temperature til +180°C
Shaft and spindle made of stainless steel
Bearing material iglidur® X
Carriage and traverses made of anodised aluminum
SHTC - HYD Hygienic Design
Easy-to-rinse solution
Bolted connections are easily accessible and generously designed for clearances
Materials: Plastic and VA stainless steel
drylin® SHTP drive technolog "light"
SHTP mini - small and low-priced
Miniature version
Very low weight
Very low priced
Corrossion-resistant
Carriages and shaft end supports
made of high-performance polymers
SHTP - Economical
Solid polymer design
Low weight
Low priced
Corrossion-resistant
SHTP leadscrew module with quick release
lighter solid polymer model
For fast format adjustments
Brake by interlocking included
Freely selectable stroke lengths
DryLin® SLW - drive technology
SLW - The compact one
Flat and compact
High torsional stability (stiffening)
Completely supported
Hard anodized aluminium rail
SLWE – PL - preload
Flat and compact
High torsional stability (stiffening)
Completely supported
Hard anodized aluminium rail
SLWE-BB ball-bearing
Lower drive force
Minimized clearance up to 1500 rev/min (according to length and load)
Quiet operation – reduced vibration of the overall system
SLWS - compact with steep thread
Pitch 8 x 15 mm
Flat and compact
High torsional stability (stiffening)
Hard anodized aluminium rail
SAW – linear modul
Trapezoidal or high helix spindle
Threaded drive spindle with ball bearing
Rail extrusion with high profile form factor, extremely torsion resistant
SLW-ES – stainless steel version
Stainless steel version with corrosion-resistant steel components (1.42305, 1.4408 or 1.4571)
Bearing material selectable
SLW-PT – with protected lead screw
drylin® W profile rail as a protective mechanism
Available with pitch 10x2, 10x12 or 10x50
Compact design
3 carriage lengths
SLWT - two lead screw modules in one structure
Different lead screw pitches can be combined
Separate manual adjustment of carriages
Lubrication-free linear guide drylin® W
Operation either manual or motorised
SLW - with digital measuring system
Space-saving sensor integrated in the carriage
Operation without mains supply
Integrated magnetic tape
Lubricant-free operation
Extensive accessories available
SLN – Low profile linear axis
Small (installation height from 22 mm), light and flat
for manual operation with hand wheel
SLN – Low profile linear axis with motor
Small (installation height from 22 mm), light and flat
motorized operation
DryLin® - cross slide
SLW - cross slide
Low cost cross slide solution for manual adjustments
lubricant-free and corrosion resistant
Maximum stroke length in XY tables 300 mm
SLW - cross slide - stainless steel
For manual adjustments
Flat and compact
All construction materials: VA and V4A stainless steel
Resistant to chemicals and corrosion
SHT/SHT-PL - cross slide
High precision, extreme stiffening and precise alignment through CNC production
Available as standard and preload version
Mounting of upper unit with right or left alignment possible
Ready-to-connect DryLin® drive system for step motor
Ready-to-connect SAW for step motor
For your step motor
Type NEMA-23
Threaded drive spindle, ball-bearing mounted
Pitches 2 mm, 3 mm, 12 mm or 50 mm per rotation
Compact design, low weight, high stability
SHT accessories for motor connections
Fast and easy coupling of your motor with the maintenance-free DryLin® linear units. Spacer, motor flange and coupling form a construction kit for the easy installation of your NEMA23.
DryLin® SHT and SLW accessories
Cursor
Plastic analog display for the adjustment and direct reading of the carriage position.
Spindle clamp
Shaft clamping flange to be mounted on the cursor for a clamping of the threaded spindle.
Hand wheel
Hand wheel to be mounted at the end of the threaded spindle. Various types of handles available.
V-drive
The DryLin® SHT-WT angular drives offer maximum flexibility in positioning.
Bracket kit
DryLin® SHT-WS is the new angle kit for the SHT linear sliding tables range.
Spindle support SLW-1040
Smart solution for long stroke lengths of the SLW linear modules
Fitting motors for this articles:
drylin® E - product overview
The consistant development of the toolbox and system concept of the lubrication-free drylin® drive technology.
High dirt-resistance
Cost-effective and reliable
Modular design, permits simple installation
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!