By using our webpages, you agree to our use of cookies. OK

Micro FLIZZ® - A system for the safe guidance of energy, data and air

With the smallest of e-chains® master long travels – without any interruptions.

Compact, quiet, cost-saving complete system to reliably guide energy, data and air
Maintenance-free alternative to power line
e-chain® is guided in special slot, no gliding against each other
Control through stationery switch cabinet possible
Acceleration up to 50 m/s² and operating speed up to 6 m/s
Quick installation through preassembled system in modular design
Low space requirement
Available also as pre-assembled
Smooth-running through ball-bearing mounted carriage
Also with EX tested e-chain® available
(on request)
Material rail MF06/MF08: aluminum anodized,
Material rail MF10: black andonized
iF-Design Award

In the picture: Storage and retrieval units for high-bay warehouses, indoor cranes, industrial gates, work station equipment.
Other application areas: Sewage plants, camera systems, sliding doors, control cabinets, measuring systems, studio equipment (lighting), materials handling systems.

Micro FLIZZ® technical facts

Separate upper and lower runs on the FLIZZ® E-Chain®,
hence less friction and reduced power consumption in motion

"Wings" firmly hold the E-Chain® in the guide channel

Plastic spring enables the E-Chain® to roll softy in the FLIZZ® channel, thereby significantly reducing the noise

Integrated strain relief in the carriage for secure fixing of the cables

Universal connection through three T-slots possible

The e-chain® is fastened at the moving end via the moving end carriage

Usable in the counter direction, which means double filling or two separate travels is possible

Separate upper and lower runs: wings fold in in the radius. e-chain® glides freely

Fold out in the extended condition, the E-Chain® firmly holds in the Micro FLIZZ® guide channel

Energy, data, pneumatics in the smallest space. Chainflex® cables are optimally designed for this application

Polymer spring dampens the rolling noise of the e-chain® in the flizz® channel - thus minimizes noise emission

Micro flizz® accessories: Moving end
connector for compressed air coupling

Potential application area for the micro flizz®: Storage and retrieval units, indoor cranes, etc.

Before: Lower run moves - glide mode. Long travels require large, stable types of E-Chain®

Today: Micro FLIZZ® - Small E-Chain® self-guiding in the guide channel - Friction reduced by a factor of 3 compared with conventional designs.

Micro FLIZZ® Series MF06

Micro FLIZZ® Series MF08

Micro FLIZZ® Series MF10

Delivery program MF06

Order no.	Bi [mm]	Ba [mm]	hi [mm]	ha [mm]	R [mm]
MF.06.10.018	10	19	11	17	018	Upon request
More about selected part:
3D-CAD PDF Quote request Price list myCatalog

further dimensions
Installation height for the complete system:	108,48 mm
Installation width of the complete system:	29,5 mm
Recommended length of the trough sections:	2.0 m, 3.0 m and 6.0 m - Material: Aluminum die-casting
Maximum cable/hose outer diameter:	Ø 8 mm

Delivery program MF08

Order no.	Bi [mm]	Ba [mm]	hi [mm]	ha [mm]	R [mm]
MF.08.18.035	18	29	13	21	035	Upon request
More about selected part:
3D-CAD PDF Quote request Price list myCatalog

further dimensions
Installation height for the complete system:	161 mm
Installation width of the complete system:	40,5 mm
Recommended length of the trough sections:	2,0 m, 3,0 m and 6,0 m - Material: Aluminum die-casting
Maximum cable/hose outer diameter:	Ø 9,5 mm

Delivery program MF10

Order no.	Bi [mm]	Ba [mm]	hi [mm]	ha [mm]	R [mm]
MF.10.50.075	50	63	20	27.5	075	Upon request
More about selected part:
3D-CAD PDF Quote request Price list myCatalog

further dimensions
Installation height for the complete system:	275 mm
Installation width of the complete system:	107,6 mm
Recommended length of the trough sections:	Standard trough section: 2 m length, black anodized steel
Maximum cable/hose outer diameter:	Ø 16 mm

Order example - end infeed

Micro FLIZZ® as an end infeed version with a total length of 5000 mm, distributed over 2 channels of 2000 mm each and 1 channel with a residual length of 1000 mm

Bi = e-chains® internal width
R = bending radius [mm]
n= number of channel pieces
S = travel distance = L- 300[mm]
F = field length [mm]
L = total length [mm]
X = remaining length [mm]

MF.06.10.018.5000/2000 Version MF06
MF.08.18.035.5000/2000 Version MF08
MF.10.50.075.5000/2000 Version MF08

MF = Micro FLIZZ® End infeed
06./08.10 = Version(Series)
10./18.50 = e-chains® Inner width
018./035./075 = Bending radius [mm]
5000/2000 = total length / field length [mm]

This is how you work out the number of channel sections required (n):
n=L/F
Then round the result down.

1 = Fixed end
2 = Moving end (-carriage)
F = Recommended channel length
Bi = Series 06: 10 mm / Series 08: 18 mm / Series 10: 50 mm
hi = Series 06: 11mm / Series 08: 13 mm / Series 10: 20 mm

Order example - 2 carriages running in the opposite direction

Micro FLIZZ® assembled with 2 carriages in opposite directions - total length 10,000 mm, distributed over 2 channels of 3,000 mm each, the infeed module (200 mm) and 2 channel each with a residual length of 1,900 mm.

Bi = E-Chains® internal width
R = bending radius [mm]
n = number of channel pieces
S = travel distance = L- 300[mm]
F = field length [mm]
L = total length [mm]
X = remaining length [mm]

MFG2.06.10.018.5000/2000 Version MF06
MFG2.08.18.035.5000/2000 Version MF08
MFG2.10.50.075.5000/2000 Version MF08

MFG2 = micro flizz® 2 carriages running in opposite directions
06./08./10. = Version (Series)
10./18./50. = e-chain® inner widths
018./035./075. = Bending radius [mm]
5000/2000 = Total length/field length [mm]

This is how you work out the number of channel sections required (n):
n=2*(L-200)/(2*F)
Then round the result down.

1 = Fixed end
2 = Moving end (-carriage)
F = Recommended channel length
Bi = Series 06: 10 mm / Series 08: 18 mm / Series 10: 50mm
hi = Series 06: 11mm / Series 08: 13 mm / Series 10: 20 mm

More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!

No minimum order value Delivery from 24h* 7⁰⁰ - 20⁰⁰ Delivery+Consultation Free samples Is something not to your liking? / Feedback