iglidur® JATM/VATM - Defined glide pairing
iglidur® JATM/VATM consists of a hard-anodized ring and a bearing ring made of iglidur® J (JATM) and iglidur® V400 (VATM). These glide pairings fetch low coefficients of friction and high wear resistance - without lubrication.
Special features
More dimensions and supplies on request
Maintenance-free plain bearing system
For high service performances
High stiffening
Simple installation
Material: iglidur® J
High temperature options VATM, iglidur® V400
More dimensions and supplies on request
When to use it?
- When an axial bearing system with defined gliding partners is desired
- When extremely high wear resistance is required
- When a very low coefficient of friction is desired
When not to use it?
- When an additional angle compensation is requiredigubal® axial bearing
- When little mounting space is available
iglidur® J - When only sporadic movements are present
iglidur® G
Determined wear rates and coefficients of friction of the axial bearing JATM
Y = wear [μm/km]
Figure 36.1: The diagram shows the influence of load (p in MPa) and speed (v in m/s) on the wear of the axial bearing.
Y= Coefficient of friction
Figure 36.2: In the test with different speeds (v) and loads (p) the coefficients of friction of the bearing systems were determined (v in m/s, p in MPa).
|
Part No.: |
|
| d1 [mm]: | |
Example for version [mm]
| Part No. | d1
[mm] |
d2
[mm] |
b1
[mm] |
d4
[mm] |
d5
[mm] |
||
|---|---|---|---|---|---|---|---|
 JATM-2036-070 |
20 | 36 | 7 | 30 | 3 | Upon request |  |
| VATM-2036-070 |
20 | 36 | 7 | 30 | 3 | Upon request | |
| More about selected part: | |||||||
3D-CAD
Sample request
PDF
Quote request
Price list
myCatalog
|
|||||||
Please contact us, if you need a tailor-made axial bearing for your application. We will be pleased to support you by the project management and give you a corresponding estimate.
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!