By using our webpages, you agree to our use of cookies. OK

iglidur® clips2 - Fit for high loads

Easy-to-mount clip-type plain bearing made from our proven and tested iglidur® M250 material. The chamfered slot compensates for the housing tolerances and enables low bearing clearance and easy installation.

Special features

Low bearing clearance, very accurate

Simple mounting through chamfered slot

Material: iglidur® M250

Maintenance-free and calculable service life

When to use it?

When a simple assembly (by hand) is required

When there is a very imprecise housing bore

When a simple and cost effective bearing solution is sought

When not to use it?

When the bearing should be secured by press fit
iglidur® M250

When constant temperatures of more than +80℃ occur
iglidur® G

When very high surface pressures occur
iglidur® G

iglidur® M250 - Material data

iglidur® - clip bearing, metric


Part No.:
d1 [mm]:

Dimensions [mm]

Part no.	d1	d1*	d2**	d3	d3	b1	b1	b2	b2
		Tolerance			Tolerance		Tolerance		Tolerance
MYM-04-04	4	+0,025/+0,075	5.2	7,0	+/- 0,40	4	-0,40	0.6	-0,13	Upon request
MYM-05-05	5	+0,025/+0,075	6.2	8,0	+/- 0,40	5	-0,40	0.6	-0,13	Upon request
MYM-06-06	6	+0,025/+0,075	7.2	9,5	+/- 0,40	6	-0,40	0.6	-0,13	0.99 USD
MYM-08-08	8	+0,025/+0,075	9.6	12,0	+/- 0,40	8	-0,40	0.8	-0,13	Upon request
MYM-10-10	10	+0,025/+0,075	11.6	15,0	+/- 0,40	10	-0,40	0.8	-0,13	Upon request
MYM-12-12	12	+0,025/+0,075	13.6	18,0	+/- 0,40	12	-0,40	0.8	-0,13	Upon request
MYM-14-14	14	+0,025/+0,075	15.6	21,0	+/- 0,40	14	-0,40	0.8	-0,13	Upon request
MYM-16-16	16	+0,025/+0,075	17.6	24,0	+/- 0,40	16	-0,40	0.8	-0,13	Upon request
MYM-20-16	20	+0,025/+0,075	21.6	30,0	0	16	0	0.8	0	Upon request
MYM-20-20	20	+0,025/+0,075	21.6	30,0	+/- 0,40	20	-0,40	0.8	-0,13	Upon request
MYM-25-25	25	+0,025/+0,075	27.4	37,5	+/- 0,40	25	-0,40	1.2	-0,13	Upon request
More about selected part:
3D-CAD Sample request PDF Quote request Price list myCatalog

*d1 is checked with gage, joinable/not joinable after the insertion in test housing with d2 (+0.005).
** Recommended tolerance of the housing bore: h9

iglidur® clip bearing, inch


Part No.:
b1 [inch]:

Dimensions in inches

Part No.	d1	Shaft diameter		d2	Housing bore		d3	b1	b1	b2
		min.	max.		min.	max.			tolerance
MYI-03-03	3/16	0.1875	0.1865	0,2339	0,2351	0,2339	19/61	3/16	-0,016	0.0252	0.50 USD
MYI-04-04	1/4	0.0024	0.249	0,2965	0,2979	0,2965	13/32	1/4	-0,016	0.0252	0.51 USD
MYI-05-05	5/16	0.3125	0.3115	0,3744	0,3758	0,3744	1/2	5/16	-0,017	0.0299	0.56 USD
MYI-06-06	3/8	0.375	0.374	0,4370	0,4387	0,4370	19/32	3/8	-0,017	0.0299	1.32 USD
MYI-07-07	7/16	0.4375	0.4365	0,4996	0,5013	0,4996	21/32	7/16	-0,017	0.0299	0.60 USD
MYI-08-06	1/2	0.5	0.499	0,5618	0,5635	0,5618	3/4	3/4	-0,018	0.0299	Upon request
MYI-08-08	1/2	0.5	0.499	0,5618	0,5635	0,5618	3/4	1/2	-0,018	0.0299	1.02 USD
MYI-10-07	5/8	0.625	0.624	0,6870	0,6887	0,6870	15/16	7/16	-0,018	0.0299	Upon request
MYI-10-10	5/8	0.625	0.624	0,6870	0,6887	0,6870	15/16	5/8	-0,018	0.0299	0.67 USD
MYI-10-14	5/8	0.625	0.624	0,6870	0,6887	0,6870	15/16	7/8	-0,018	0.76	Upon request
MYI-10-18	5/8	0.625	0.624	0,6870	0,6887	0,6870	15/16	1 1/8	-0,018	0.0299	Upon request
MYI-12-12	3/4	0.75	0.749	0,8118	0,8139	0,8118	1 1/8	3/4	-0,019	0.0299	0.79 USD
MYI-12-18	3/4	0.75	0.749	0,8118	0,8139	0,8118	1 1/8	1 1/8	-0,019	0.0299	1.10 USD
MYI-14-7,5	7/8	0.875	0.874	0,9370	0,9391	0,9370	1 5/16	15/32	-0,019	0.0299	Upon request
MYI-14-14	7/8	0.875	0.874	0,9370	0,9391	0,9370	1 5/16	7/8	-0,019	0.0299	0.86 USD
MYI-16-10	1	1	0.9985	1,0933	1,0954	1,0933	1 1/2	5/8	-0,020	0.0449	Upon request
MYI-16-14	1	1	0.9985	1,0933	1,0954	1,0933	1 1/2	7/8	-0,020	0.0449	Upon request
MYI-16-16	1	1	0.9985	1,0933	1,0954	1,0933	1	1	-0,020	0.0449	2.23 USD
More about selected part:
3D-CAD Sample request PDF Quote request Price list myCatalog

More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!

No minimum order value Delivery from 24h* 7⁰⁰ - 20⁰⁰ Delivery+Consultation Free samples Is something not to your liking? / Feedback