New Japanese standard in solid plastic
Lubricant free, accurate, easy and quick to install.
These are clearly and briefly the advantages of the
new solid plastic bearing made from iglidur® J4 in
Japanese dimension. In Ø 8 mm, the cost-effective
drylin® bearing provides the lubricant free alternative
to conventional ball bearings in 3D printers.
Lubricant free alternative to ball bearings with Japanese dimension
Long service life
Quickly installed, secured by circlips
Light and clean
Typical applications:3D printers, gantries
| Article No. | d1 | d2 | B | B1 | s | dn | ||
|---|---|---|---|---|---|---|---|---|
| RJ4JP-01-08 | 8 | 15 | 24 | 17.5 | 1.1 | 14.3 | Upon request |  |
| RJ4JP-01-10 | 10 | 19 | 29 | 22 | 1.3 | 18 | Upon request | |
| RJ4JP-01-12 | 12 | 21 | 30 | 23 | 1.3 | 20 | Upon request | |
| RJ4JP-01-16 | 16 | 28 | 37 | 26.5 | 1.6 | 26.6 | Upon request | |
| RJ4JP-01-20 | 20 | 32 | 42 | 30.5 | 1.6 | 30.3 | Upon request | |
| More about selected part: | ||||||||
3D-CAD
Sample request
Experts
Quote request
Price list
myCatalog
|
||||||||
| Article No. | Shaft Ø |
Tolerance d1 | Fmax. dyn., P=2,5 MPa |
Fmax. stat., P=2,5 MPa |
Weight |
|---|---|---|---|---|---|
| [mm] | [mm] | [N] | [N] | [g] | |
| RJ4JP-01-08 | 8 | + 0,04 | 200 | 800 | 2 |
| RJ4JP-01-10 | 10 | + 0,04 | 300 | 1200 | 6 |
| RJ4JP-01-12 | 12 | + 0,04 | 400 | 1600 | 8 |
| RJ4JP-01-16 | 16 | + 0,04 | 700 | 2800 | 16 |
| RJ4JP-01-20 | 20 | + 0,04 | 1000 | 4000 | 23 |
| More about selected part: | |||||
|
3D-CAD
Sample request
Experts
Quote request
Price list
myCatalog
|
|||||
Delivery
from stock/ex stock
More information:
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!