Compact fluid aggregates and accessories with your readychain®
Pneumatic and hydraulic systems, lubrication systems, electrohydraulic controls and regulations have been included in the scope of delivery of our igus® readychains® since a long time. igus® offers the complete integration of products from electronic control technology, hydraulics, pneumatics, magnet technology, fluid sensors and control sensors into the delivered scope of the e-chain® modules.
Very low noise due to the special design
Minimal installation dimensions due to small flange dimension
Different hydraulic controls available in the same flange
characteristics
)
| Flow rate Q | up to 20,0 l/min |
| Continuous pressure | up to 250 bar |
| Peak pressure | up to 300 bar (on request) – available with reduced load cycles, depending on pump size! |
| Motor | 0.37 – 3.0 kW standard (4.0 and 5.5 kW on request) |
| Protection class | DIN EN 60034-5 min IP 54 |
| Characteristic pump size | Vg 1,0 – 10 cm3 |
| Tank/feed volume | 1,2 l – 7,8 l |
| Duty cycle S2 | approx. 5 min (short operating time) |
| S3: | approx. 20% (intermittent service) |
| Compression fluid | mineral oils acc. to DIN 51524 part 2 |
| Compression fluid temperature range |
min. –20 °C up to max. +80 °C |
| Viscosity range | min. 10 mm2/s – max. 380 mm2/s |
| Filtering | Operating fluid iaw ISO 4406 Class 21/19/16 or better |
| Ambitient temperature | –20 °C to +40 °C |
| Backflush volume | to a maximum of 40 l/min |
More information:
More than 100,000 products available! Delivery and consultation Mon-Fri from 7am-8pm and Sat from 8am-12pm!