By using our webpages, you agree to our use of cookies. OK

DryLin® R - Solid polymer bearing RJM-01, mm

Special features

Bearing made of iglidur® J

Dimensions corresponding to the standard for recirculating ball bearings

Recommended housing bore (d2) H7

Installation by force fitting

Recommended tolerance for the shaft: h6-h10

Fastening with circlips according to DIN 471 and/or 472 (not included in the delivery)

The E9 inner tolerance ensues only after the press fit.

More information on iglidur® J

Solid polymer bearing RJM-01, mm


Part No.:
d1 [mm]:

Inner diameter, load capacity and weight

Order no.	Shaft Ø	Tolerance for d1 E9	Fmax.* [N] dynamic P = 2,5 MPa	Fmax.* [N] static P = 17,5 MPa	Weight	Press-in force**
	[mm]	[mm]			[g]	[N]
RJM-01-08	8	0,025-0,061	250	1750	4	400	4.79 USD
RJM-01-10	10	0,032-0,075	363	2538	7	700	4.79 USD
RJM-01-12	12	0,032-0,075	480	3360	9	1300	6.12 USD
RJM-01-16	16	0,032-0,075	720	5040	13	1100	6.31 USD
RJM-01-20	20	0,040-0,092	1125	7875	24	1500	5.98 USD
RJM-01-25	25	0,040-0,092	1813	12688	47	3500	6.85 USD
RJM-01-30	30	0,040-0,092	2550	17850	72	4500	8.51 USD
RJM-01-40	40	0,050-0,112	4000	28000	127	4200	Upon request
More about selected part:
3D-CAD Sample request Experts PDF Quote request Price list myCatalog

*Tolerance according to igus® test method, Fmax. see link - Test method and design information
**applies by room temperature, the press-fit decreases by time and temperature

igus® test method and design tips

Dimensions [mm]

Order no.	d1	d2	B	B1	s	dn
	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]
RJM-01-08	8	16	25	16.2	1.1	15.2
RJM-01-10	10	19	29	21.6	1.3	17.2
RJM-01-12	12	22	32	22.6	1.3	20.5
RJM-01-16	16	26	36	24.6	1.3	24.2
RJM-01-20	20	32	45	31.2	1.6	29.6
RJM-01-25	25	40	58	43.7	1.85	36.5
RJM-01-30	30	47	68	51.7	1.85	43.5
RJM-01-40	40	62	80	60.3	2.15	57.8
More about selected part:
3D-CAD Sample request Experts PDF Quote request Price list myCatalog